Loading docs/source/inputs/InputsProblemDefinition.rst +5 −5 Original line number Diff line number Diff line Loading @@ -675,8 +675,8 @@ The type of the boundary conditions in the BC region must be defined. | | * 'po' for pressure outflow BC type | | | | | * 'mi' for mass inflow BC type | | | | | * 'nsw' for no-slip wall BC type | | | | | * 'eb' for setting inhomogeneous Dirichlet BCs on the contained EBs | | | | | * 'eb' for setting inflow for fluid on the EB. | | | | | * 'eb' for inhomogeneous Dirichlet BCs of temperature or fluid | | | | | velocity (mass inflow) on the contained EBs | | | +---------------------+-----------------------------------------------------------------------+-------------+-----------+ For a fluid phase, the following inputs can be defined. Loading Loading @@ -800,11 +800,11 @@ provided when appropriate. | fluid.volfrac | (Required) Volume fraction. | Real | None | +---------------------+-----------------------------------------------------------------------+-------------+-----------+ | eb.normal | (Optional) When specified, only cells with EB face normal that is | Reals | None | | | parallel and opposite in direction to the specified value are | | | | | imposed with the inflow velocity. | | | | | parallel and opposite in direction to the specified values | | | | | are imposed with the inflow velocity. | | | +---------------------+-----------------------------------------------------------------------+-------------+-----------+ | eb.normal_tol | (Optional) Used in conjunction with `eb.normal`. It determines the | Real | None | | | tolerance for choosing cells with a specific normal. | | | | | tolerance (in degrees) for choosing cells with a specific normal. | | | +---------------------+-----------------------------------------------------------------------+-------------+-----------+ Below is an example for specifying a normal inflow velocity magnitude for a region `eb-flow`. Loading Loading
docs/source/inputs/InputsProblemDefinition.rst +5 −5 Original line number Diff line number Diff line Loading @@ -675,8 +675,8 @@ The type of the boundary conditions in the BC region must be defined. | | * 'po' for pressure outflow BC type | | | | | * 'mi' for mass inflow BC type | | | | | * 'nsw' for no-slip wall BC type | | | | | * 'eb' for setting inhomogeneous Dirichlet BCs on the contained EBs | | | | | * 'eb' for setting inflow for fluid on the EB. | | | | | * 'eb' for inhomogeneous Dirichlet BCs of temperature or fluid | | | | | velocity (mass inflow) on the contained EBs | | | +---------------------+-----------------------------------------------------------------------+-------------+-----------+ For a fluid phase, the following inputs can be defined. Loading Loading @@ -800,11 +800,11 @@ provided when appropriate. | fluid.volfrac | (Required) Volume fraction. | Real | None | +---------------------+-----------------------------------------------------------------------+-------------+-----------+ | eb.normal | (Optional) When specified, only cells with EB face normal that is | Reals | None | | | parallel and opposite in direction to the specified value are | | | | | imposed with the inflow velocity. | | | | | parallel and opposite in direction to the specified values | | | | | are imposed with the inflow velocity. | | | +---------------------+-----------------------------------------------------------------------+-------------+-----------+ | eb.normal_tol | (Optional) Used in conjunction with `eb.normal`. It determines the | Real | None | | | tolerance for choosing cells with a specific normal. | | | | | tolerance (in degrees) for choosing cells with a specific normal. | | | +---------------------+-----------------------------------------------------------------------+-------------+-----------+ Below is an example for specifying a normal inflow velocity magnitude for a region `eb-flow`. Loading
