From 273360a8326aa4491b9940e099bc05e2c31221e7 Mon Sep 17 00:00:00 2001
From: Roberto Porcu <robbberto88@gmail.com>
Date: Mon, 1 Jun 2020 14:08:46 -0400
Subject: [PATCH] Fixed some errors
---
docs/source/InputsProblemDefinition.rst | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/docs/source/InputsProblemDefinition.rst b/docs/source/InputsProblemDefinition.rst
index d2c3623..40426c9 100644
--- a/docs/source/InputsProblemDefinition.rst
+++ b/docs/source/InputsProblemDefinition.rst
@@ -116,7 +116,7 @@ The following inputs must be preceded by the given to the species solver e.g., "
| | [required if diffusivity_model="constant"] | | |
+-------------------------------+----------------------------------------------------------------+----------+-----------+
-Below is an example for specifying fluid solver model options.
+Below is an example for specifying species solver model options.
.. code-block:: none
@@ -190,8 +190,8 @@ Below is an example for specifying fluid solver model options.
myfluid.specific_heat = constant
myfluid.specific_heat.constant = 918
- myfluid.conductivity = constant
- myfluid.conductivity.constant = 0.024
+ myfluid.thermal_conductivity = constant
+ myfluid.thermal_conductivity.constant = 0.024
myfluid.species = O2 H2O He N2 CO
@@ -430,11 +430,11 @@ The type of the boundary conditions in the BC region must be defined.
+=====================+=======================================================================+=============+===========+
| bc.[region] | Used to define boundary condition type. Available options include: | String | None |
| | | | |
-| | * 'pi' or 'pressure_inflow' | | |
-| | * 'po' or 'pressure_outflow' | | |
-| | * 'mi' or 'mass_inflow' | | |
-| | * 'nsw' or 'no_slip_wall' | | |
-| | * 'eb' or 'embedded boundary' | | |
+| | * 'pi' for pressure inflow BC type | | |
+| | * 'po' for pressure outflow BC type | | |
+| | * 'mi' for mass inflow BC type | | |
+| | * 'nsw' for no-slip wall BC type | | |
+| | * 'eb' for setting BCs on the embedded boundary | | |
+---------------------+-----------------------------------------------------------------------+-------------+-----------+
For a fluid phase, the following inputs can be defined.
@@ -455,7 +455,7 @@ For a fluid phase, the following inputs can be defined.
+---------------------+-----------------------------------------------------------------------+-------------+-----------+
| eb_temperature | Inhomogeneous Dirichlet BC value for temperature on EBs contained in | Real | None |
| | the (tridimensional) region | | |
-| | [required if advect_enthalpy=1 and (bc_region_type="eb"] | | |
+| | [required if advect_enthalpy and bc_region_type="eb"] | | |
+---------------------+-----------------------------------------------------------------------+-------------+-----------+
@@ -463,7 +463,7 @@ Below is an example for specifying boundary conditions for a fluid `myfluid`.
.. code-block:: none
- bc.regions = full-domain inflow outflow hot-wall
+ bc.regions = inflow outflow hot-wall
bc.inflow = mi
bc.inflow.myfluid.volfrac = 1.0
--
GitLab