diff --git a/docs/source/inputs/InputsProblemDefinition.rst b/docs/source/inputs/InputsProblemDefinition.rst
index 194f16a79faa8bfc5540f5fc1bf25779f6abdb7a..14c2606fde515e9412f588d57088eee536c84e3b 100644
--- a/docs/source/inputs/InputsProblemDefinition.rst
+++ b/docs/source/inputs/InputsProblemDefinition.rst
@@ -246,6 +246,9 @@ The following inputs must be preceded by the given to the fluid solver e.g., "fl
| thermal_conductivity.constant | Value of constant fluid thermal conductivity [required | Real | None |
| | if thermal_conductivity_model='constant']. | | |
+------------------------------------------+----------------------------------------------------------+--------+----------+
+| thermodynamic_pressure | Value of the thermodynamic pressure [required if the | Real | 0 |
+| | constraint type is IdealGasClosedSystem] | | |
++------------------------------------------+----------------------------------------------------------+--------+----------+
| reference_temperature | Value of the reference temperature used for specific | Real | 0 |
| | enthalpy | Real | 0 |
+------------------------------------------+----------------------------------------------------------+--------+----------+
@@ -260,11 +263,11 @@ The following inputs must be preceded by the given to the fluid solver e.g., "fl
| | different than the value specified in the species | | |
| | model settings | | |
+------------------------------------------+----------------------------------------------------------+--------+----------+
-| damped_newton.absolute_tol | Define absolute tolerance for Damped-Newton solver | Real | 1.e-8 |
+| newton_solver.absolute_tol | Define absolute tolerance for Damped-Newton solver | Real | 1.e-8 |
+------------------------------------------+----------------------------------------------------------+--------+----------+
-| damped_newton.relative_tol | Define relative tolerance for Damped-Newton solver | Real | 1.e-8 |
+| newton_solver.relative_tol | Define relative tolerance for Damped-Newton solver | Real | 1.e-8 |
+------------------------------------------+----------------------------------------------------------+--------+----------+
-| damped_newton.max_iterations | Define max number of iterations for Damped-Newton solver | int | 500 |
+| newton_solver.max_iterations | Define max number of iterations for Damped-Newton solver | int | 500 |
+------------------------------------------+----------------------------------------------------------+--------+----------+
Below is an example for specifying fluid solver model options.
@@ -309,11 +312,11 @@ models.
| | the SOLIDS solver. The user defined names are used to | | |
| | specify DEM and/or PIC model inputs. | | |
+------------------------------+----------------------------------------------------------+----------+----------+
-| damped_newton.absolute_tol | Define absolute tolerance for Damped-Newton solver | Real | 1.e-6 |
+| newton_solver.absolute_tol | Define absolute tolerance for Damped-Newton solver | Real | 1.e-6 |
+------------------------------+----------------------------------------------------------+----------+----------+
-| damped_newton.relative_tol | Define relative tolerance for Damped-Newton solver | Real | 1.e-6 |
+| newton_solver.relative_tol | Define relative tolerance for Damped-Newton solver | Real | 1.e-6 |
+------------------------------+----------------------------------------------------------+----------+----------+
-| damped_newton.max_iterations | Define max number of iterations for Damped-Newton solver | int | 100 |
+| newton_solver.max_iterations | Define max number of iterations for Damped-Newton solver | int | 100 |
+------------------------------+----------------------------------------------------------+----------+----------+
The following inputs define the single solids properties.
@@ -530,13 +533,8 @@ For a fluid phase, the following inputs can be defined.
+------------------------+------------------------------------------------------------------------+-------------+-----------+
| density | Fluid density | Real | None |
+------------------------+------------------------------------------------------------------------+-------------+-----------+
-| pressure | Fluid pressure | Real | None |
-+------------------------+------------------------------------------------------------------------+-------------+-----------+
| temperature | Fluid temperature | Real | None |
+------------------------+------------------------------------------------------------------------+-------------+-----------+
-| thermodynamic_pressure | Fluid thermodynamic pressure [exactly two between density, temperature | Real | 0.0 |
-| | and thermodynamic pressure required in case of Ideal Gas EOS] | | |
-+------------------------+------------------------------------------------------------------------+-------------+-----------+
| velocity | Velocity components | Reals | None |
+------------------------+------------------------------------------------------------------------+-------------+-----------+
| species.[species0] | Species 'species0' mass fraction | Reals | None |
@@ -622,7 +620,6 @@ Below is an example for specifying an initial condition for a fluid (fluid) and
ic.bed.fluid.density = 1.0
ic.bed.fluid.velocity = 0.015 0.00 0.00
ic.bed.fluid.temperature = 383.0
- ic.bed.fluid.thermodynamic_pressure = 101325.0
ic.bed.fluid.species.H20 = 0.3
ic.bed.fluid.species.He = 0.2
ic.bed.fluid.species.O2 = 0.5
@@ -685,9 +682,6 @@ For a fluid phase, the following inputs can be defined.
+------------------------+------------------------------------------------------------------------+-------------+-----------+
| temperature | Fluid temperature [required if bc_region_type='mi' or 'pi'] | Real | 0.0 |
+------------------------+------------------------------------------------------------------------+-------------+-----------+
-| thermodynamic_pressure | Fluid thermodynamic pressure [exactly two between density, temperature | Real | 0.0 |
-| | and thermodynamic pressure required in case of Ideal Gas EOS] | | |
-+------------------------+------------------------------------------------------------------------+-------------+-----------+
| velocity | Velocity components [required if bc_region_type='mi'] | Reals | None |
+------------------------+------------------------------------------------------------------------+-------------+-----------+
| delp_dir | Direction for specified pressure drop. Note that this direction | Int | 0 |