Fixed some errors

|                               |   [required if diffusivity_model="constant"]                   |          |           |

+-------------------------------+----------------------------------------------------------------+----------+-----------+

Below is an example for specifying fluid solver model options.

Below is an example for specifying species solver model options.

.. code-block:: none

   myfluid.specific_heat = constant

   myfluid.specific_heat.constant = 918

   myfluid.conductivity = constant

   myfluid.conductivity.constant = 0.024

   myfluid.thermal_conductivity = constant

   myfluid.thermal_conductivity.constant = 0.024

   myfluid.species = O2 H2O He N2 CO

+=====================+=======================================================================+=============+===========+

| bc.[region]         | Used to define boundary condition type. Available options include:    |  String     |  None     |

|                     |                                                                       |             |           |

|                     | * 'pi'  or 'pressure_inflow'                                          |             |           |

|                     | * 'po'  or 'pressure_outflow'                                         |             |           |

|                     | * 'mi'  or 'mass_inflow'                                              |             |           |

|                     | * 'nsw' or 'no_slip_wall'                                             |             |           |

|                     | * 'eb'  or 'embedded boundary'                                        |             |           |

|                     | * 'pi'  for pressure inflow BC type                                   |             |           |

|                     | * 'po'  for pressure outflow BC type                                  |             |           |

|                     | * 'mi'  for mass inflow BC type                                       |             |           |

|                     | * 'nsw' for no-slip wall BC type                                      |             |           |

|                     | * 'eb'  for setting BCs on the embedded boundary                      |             |           |

+---------------------+-----------------------------------------------------------------------+-------------+-----------+

For a fluid phase, the following inputs can be defined.

+---------------------+-----------------------------------------------------------------------+-------------+-----------+

| eb_temperature      | Inhomogeneous Dirichlet BC value for temperature on EBs contained in  | Real        | None      |

|                     | the (tridimensional) region                                           |             |           |

|                     |   [required if advect_enthalpy=1 and (bc_region_type="eb"]            |             |           |

|                     |   [required if advect_enthalpy and bc_region_type="eb"]               |             |           |

+---------------------+-----------------------------------------------------------------------+-------------+-----------+

.. code-block:: none

   bc.regions = full-domain inflow outflow hot-wall

   bc.regions = inflow outflow hot-wall

   bc.inflow = mi

   bc.inflow.myfluid.volfrac     =  1.0