Loading docs/source/InputsProblemDefinition.rst +14 −5 Original line number Diff line number Diff line Loading @@ -85,7 +85,8 @@ To specify multiple mass inflows (e.g., define a jet and uniform background flow xlo.zhi = 0.75 ## Fluid model settings ## Fluid model settings -------------------- Enabling the fluid solver and specifying fluid model options. Loading @@ -98,6 +99,7 @@ Enabling the fluid solver and specifying fluid model options. The following inputs must be preceded by the given to the fluid solver e.g., "fluid." +----------------------+-------------------------------------------------------------------------+----------+-----------+ | | Description | Type | Default | +======================+=========================================================================+==========+===========+ Loading Loading @@ -126,8 +128,8 @@ Below is an example for specifying fluid solver model options. ## DEM model settings ## DEM model settings ------------------ Enabling the DEM solver and specifying model options. Loading Loading @@ -160,6 +162,7 @@ Enabling the DEM solver and specifying model options. The following inputs use the DEM type names specified using the `dem.solve` input to define restitution coefficients and are proceeded with `dem.restitution_coeff`. These must be defined for all solid-solid and solid-wall combinations. +-------------------------+-------------------------------------------------------------------------+----------+-----------+ | | Description | Type | Default | +=========================+=========================================================================+==========+===========+ Loading Loading @@ -196,7 +199,8 @@ Below is an example for specifying the inputs for two DEM solids. dem.restitution_coeff.char.wall = 0.89 ## Region definitions ## Region definitions ------------------ Regions are used to define sections of the domain. They may be either boxes, planes or points. They are used in building initial condition regions. Loading Loading @@ -224,10 +228,12 @@ Below is an example for specifying two regions. ## Initial Conditions ## Initial Conditions ------------------ Initial conditions are build from defined regions. The input names are built using the prefix `ic.`, the name of the region to apply the IC, and the name of the phase (e.g., `myfuild`). +---------------------+-----------------------------------------------------------------------+-------------+-----------+ | | Description | Type | Default | +=====================+=======================================================================+=============+===========+ Loading @@ -235,6 +241,7 @@ region to apply the IC, and the name of the phase (e.g., `myfuild`). +---------------------+-----------------------------------------------------------------------+-------------+-----------+ For a fluid phase, the following inputs can be defined. +---------------------+-----------------------------------------------------------------------+-------------+-----------+ | | Description | Type | Default | +=====================+=======================================================================+=============+===========+ Loading @@ -249,6 +256,7 @@ For a fluid phase, the following inputs can be defined. The name of the DEM phases to be defined in the IC region and the packing must be defined. +---------------------+-----------------------------------------------------------------------+-------------+-----------+ | | Description | Type | Default | +=====================+=======================================================================+=============+===========+ Loading @@ -263,6 +271,7 @@ The name of the DEM phases to be defined in the IC region and the packing must b +---------------------+-----------------------------------------------------------------------+-------------+-----------+ For each solid, the following inputs may be defined. +---------------------+-----------------------------------------------------------------------+-------------+-----------+ | | Description | Type | Default | +=====================+=======================================================================+=============+===========+ Loading Loading
docs/source/InputsProblemDefinition.rst +14 −5 Original line number Diff line number Diff line Loading @@ -85,7 +85,8 @@ To specify multiple mass inflows (e.g., define a jet and uniform background flow xlo.zhi = 0.75 ## Fluid model settings ## Fluid model settings -------------------- Enabling the fluid solver and specifying fluid model options. Loading @@ -98,6 +99,7 @@ Enabling the fluid solver and specifying fluid model options. The following inputs must be preceded by the given to the fluid solver e.g., "fluid." +----------------------+-------------------------------------------------------------------------+----------+-----------+ | | Description | Type | Default | +======================+=========================================================================+==========+===========+ Loading Loading @@ -126,8 +128,8 @@ Below is an example for specifying fluid solver model options. ## DEM model settings ## DEM model settings ------------------ Enabling the DEM solver and specifying model options. Loading Loading @@ -160,6 +162,7 @@ Enabling the DEM solver and specifying model options. The following inputs use the DEM type names specified using the `dem.solve` input to define restitution coefficients and are proceeded with `dem.restitution_coeff`. These must be defined for all solid-solid and solid-wall combinations. +-------------------------+-------------------------------------------------------------------------+----------+-----------+ | | Description | Type | Default | +=========================+=========================================================================+==========+===========+ Loading Loading @@ -196,7 +199,8 @@ Below is an example for specifying the inputs for two DEM solids. dem.restitution_coeff.char.wall = 0.89 ## Region definitions ## Region definitions ------------------ Regions are used to define sections of the domain. They may be either boxes, planes or points. They are used in building initial condition regions. Loading Loading @@ -224,10 +228,12 @@ Below is an example for specifying two regions. ## Initial Conditions ## Initial Conditions ------------------ Initial conditions are build from defined regions. The input names are built using the prefix `ic.`, the name of the region to apply the IC, and the name of the phase (e.g., `myfuild`). +---------------------+-----------------------------------------------------------------------+-------------+-----------+ | | Description | Type | Default | +=====================+=======================================================================+=============+===========+ Loading @@ -235,6 +241,7 @@ region to apply the IC, and the name of the phase (e.g., `myfuild`). +---------------------+-----------------------------------------------------------------------+-------------+-----------+ For a fluid phase, the following inputs can be defined. +---------------------+-----------------------------------------------------------------------+-------------+-----------+ | | Description | Type | Default | +=====================+=======================================================================+=============+===========+ Loading @@ -249,6 +256,7 @@ For a fluid phase, the following inputs can be defined. The name of the DEM phases to be defined in the IC region and the packing must be defined. +---------------------+-----------------------------------------------------------------------+-------------+-----------+ | | Description | Type | Default | +=====================+=======================================================================+=============+===========+ Loading @@ -263,6 +271,7 @@ The name of the DEM phases to be defined in the IC region and the packing must b +---------------------+-----------------------------------------------------------------------+-------------+-----------+ For each solid, the following inputs may be defined. +---------------------+-----------------------------------------------------------------------+-------------+-----------+ | | Description | Type | Default | +=====================+=======================================================================+=============+===========+ Loading
