Publications & Citations

This page shows a non-comprehensive list of publications that 1) cite MFIX via the original 1993 MFIX documentation: theory guide which covers the basic MFIX model or 2) include MFIX in their abstract/title/keyword. Documents that describe later development in MFIX may be found in the documentation page and the development page (member’s area).

This list is primarily generated from the ISI WWW of Knowledge bibliographic database using the above criteria and from SciTech Connect . Most of the papers listed include discussions of simulation results generated with MFIX, but a few may only cite MFIX in passing.

If your paper is not listed below, please send us the citation details to admin@mfix.netl.doe.gov .

Total: 382

Publication Year 2017

1.

Shahnam M, Gel A, Dietiker J, Subramaniyan AK, Musser J. The Effect of Grid Resolution and Reaction Models in Simulation of a Fluidized Bed Gasifier Through Nonintrusive Uncertainty Quantification Techniques. ASME. J. Verif. Valid. Uncert. 2017;1(4):041004-041004-9. doi:10.1115/1.4035445.

2.

Aytekin Gel, Mehrdad Shahnam, Arun K. Subramaniyan, Quantifying uncertainty of a reacting multiphase flow in a bench-scale fluidized bed gasifier: A Bayesian approach, Powder Technology, Volume 311, 15 April 2017, Pages 484-495, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2017.01.034.

3.

Shaohua Chen, Manogna Adepu, Heather Emady, Yang Jiao, Aytekin Gel, Enhancing the physical modeling capability of open-source MFIX-DEM software for handling particle size polydispersity: Implementation and validation, Powder Technology, Volume 317, 15 July 2017, Pages 117-125, ISSN 0032-5910, https://doi.org/10.1016/j.powtec.2017.04.055.

4.

Aytekin Gel, Jonathan Hu, ElMoustapha Ould-Ahmed-Vall & Alexander A. Kalinkin, Modernization and optimization of a legacy open-source CFD code for high-performance computing architectures, International Journal of Computational Fluid Dynamics, Volume 31, Issue 2, Pages 122-133, February 2017. https://doi.org/10.1080/10618562.2017.1285398

5.

Shahnam, M.; Gel, A.; Subramaniyan, A. K.; Musser, J.; and Dietiker, J. F., “Uncertainty Quantification Analysis of Both Experimental and CFD Simulation Data of a Bench-scale Fluidized Bed Gasifier”, NETL-PUB-21341; NETL Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2017; p 68. https://doi.org/10.2172/1398265

Publication Year 2016

1.

Peiyuan Liu, Timothy Brown, William D. Fullmer, Thomas Hauser, Christine Hrenya, Ray Grout and Hariswaran Sitaraman, “A Comprehensive Benchmark Suite for Simulation of Particle Laden Flows Using the Discrete Element Method with Performance Profiles from the Multiphase Flow with Interface eXchanges (MFiX) Code”, Technical Report NREL/TP-2C00-65637, January 2016

2.

Addison K. Stark, Christos Altantzis, Richard B. Bates, Ahmed F. Ghoniem, Towards an advanced reactor network modeling framework for fluidized bed biomass gasification: Incorporating information from detailed CFD simulations, Chemical Engineering Journal, Volume 303, 1 November 2016, Pages 409-424, ISSN 1385-8947, http://dx.doi.org/10.1016/j.cej.2016.06.026.

3.

Canhai Lai, Zhijie Xu, Wenxiao Pan, Xin Sun, Curtis Storlie, Peter Marcy, Jean-François Dietiker, Tingwen Li, James Spenik, Hierarchical calibration and validation of computational fluid dynamics models for solid sorbent-based carbon capture, Powder Technology, Volume 288, January 2016, Pages 388-406, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.11.021.

4.

Tingwen Li, William A. Rogers, Madhava Syamlal, Jean-François Dietiker, Jordan Musser, Mehrdad Shahnam, Swapna Rabha, The NETL MFiX Suite of multiphase flow models: A brief review and recent applications of MFiX-TFM to fossil energy Technologies, Chemical Engineering Science, Available online 29 July 2016, ISSN 0009-2509, http://dx.doi.org/10.1016/j.ces.2016.07.043.

5.

Rosario Porrazzo, Graeme White, Raffaella Ocone, Fuel reactor modelling for chemical looping combustion: From micro-scale to macro-scale, Fuel, Volume 175, 1 July 2016, Pages 87-98, ISSN 0016-2361, http://dx.doi.org/10.1016/j.fuel.2016.01.041.

6.

Aniruddha Choudhary, Christopher J. Roy, Jean-François Dietiker, Mehrdad Shahnam, Rahul Garg, Jordan Musser, Code verification for multiphase flows using the method of manufactured solutions, International Journal of Multiphase Flow, Volume 80, April 2016, Pages 150-163, ISSN 0301-9322, http://dx.doi.org/10.1016/j.ijmultiphaseflow.2015.12.006.

7.

Vikrant Verma, Tingwen Li, Jean-François Dietiker, William A. Rogers, Hydrodynamics of gas–solids flow in a bubbling fluidized bed with immersed vertical U-tube banks, Chemical Engineering Journal, Volume 287, 1 March 2016, Pages 727-743, ISSN 1385-8947, http://dx.doi.org/10.1016/j.cej.2015.11.049.

8.

Alice Jordam Caserta, Hélio A. Navarro, Luben Cabezas-Gómez, Damping coefficient and contact duration relations for continuous nonlinear spring-dashpot contact model in DEM, Powder Technology, Volume 302, November 2016, Pages 462-479, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2016.07.032.

9.

Naval V. Koralkar, Manaswita Bose, Performance of drag models for simulation of fluidized beds with Geldart D particles, Advanced Powder Technology, Volume 27, Issue 6, November 2016, Pages 2377-2398, ISSN 0921-8831, http://dx.doi.org/10.1016/j.apt.2016.11.008.

10.

X. Lu, D.J. Holland, Investigation of drag models for the two fluid simulation of Geldart group A powders, Powder Technology, Volume 304, December 2016, Pages 41-54, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2016.07.063.

11.

Li Peng, Yingya Wu, Chengxiu Wang, Jinsen Gao, Xingying Lan, 2.5D CFD simulations of gas–solids flow in cylindrical CFB risers, Powder Technology, Volume 291, April 2016, Pages 229-243, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.12.018.

12.

W.A. Lane, A. Sarkar, S. Sundaresan, E.M. Ryan, Sub-grid models for heat transfer in gas-particle flows with immersed horizontal cylinders, Chemical Engineering Science, Volume 151, 12 September 2016, Pages 7-15, ISSN 0009-2509, http://dx.doi.org/10.1016/j.ces.2016.05.005.

13.

Shuyan Wang, Baoli Shao, Xiangyu Li, Jian Zhao, Lili Liu, Yikun Liu, Yang Liu, Qun Dong, Simulations of vertical jet penetration using a filtered two-fluid model in a gas–solid fluidized bed, Particuology, Available online 15 October 2016, ISSN 1674-2001, http://dx.doi.org/10.1016/j.partic.2016.05.013.

14.

Aniruddha Choudhary, Christopher J. Roy, Edward A. Luke, Subrahmanya P. Veluri, Code verification of boundary conditions for compressible and incompressible computational fluid dynamics codes, Computers & Fluids, Volume 126, 1 March 2016, Pages 153-169, ISSN 0045-7930, http://dx.doi.org/10.1016/j.compfluid.2015.12.003.

15.

Linbo Yan, C. Jim Lim, Guangxi Yue, Boshu He, John R. Grace, Simulation of biomass-steam gasification in fluidized bed reactors: Model setup, comparisons and preliminary predictions, Bioresource Technology, Volume 221, December 2016, Pages 625-635, ISSN 0960-8524, http://dx.doi.org/10.1016/j.biortech.2016.09.089.

16.

Tingwen Li, Jean-François Dietiker, William Rogers, Rupen Panday, Balaji Gopalan, Greggory Breault, Investigation of CO2 capture using solid sorbents in a fluidized bed reactor: Cold flow hydrodynamics, Powder Technology, Volume 301, November 2016, Pages 1130-1143, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2016.07.056.

17.

Farzaneh Jalalinejad, Xiaotao T. Bi, John R. Grace, Comparison of theory with experiment for single bubbles in charged fluidized particles, Powder Technology, Volume 290, March 2016, Pages 27-32, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.12.014.

18.

Tingwen Li, Yongmin Zhang, Fernando Hernández-Jiménez, Investigation of particle–wall interaction in a pseudo-2D fluidized bed using CFD-DEM simulations, Particuology, Volume 25, April 2016, Pages 10-22, ISSN 1674-2001, http://dx.doi.org/10.1016/j.partic.2015.06.001.

19.

Anil Yuksel, Michael Cullinan, Modeling of nanoparticle agglomeration and powder bed formation in microscale selective laser sintering systems, Additive Manufacturing, Volume 12, Part B, October 2016, Pages 204-215, ISSN 2214-8604, http://dx.doi.org/10.1016/j.addma.2016.07.002.

20.

J. Krzywanski, A. Żyłka, T. Czakiert, K. Kulicki, S. Jankowska, W. Nowak, A 1.5D model of a complex geometry laboratory scale fuidized bed clc equipment, Powder Technology, Available online 17 September 2016, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2016.09.041.

21.

Tianqi Tang, Yurong He, Anxing Ren, Yunhua Zhao, Investigation on wet particle flow behavior in a riser using LES-DEM coupling approach, Powder Technology, Volume 304, December 2016, Pages 164-176, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2016.08.023.

22.

A.B. Morris, Z. Ma, S. Pannala, C.M. Hrenya, Simulations of heat transfer to solid particles flowing through an array of heated tubes, Solar Energy, Volume 130, June 2016, Pages 101-115, ISSN 0038-092X, http://dx.doi.org/10.1016/j.solener.2016.01.033.

23.

Tsuyoshi Yamamoto, Takahiro Tsuboi, June Tatebayashi, A numerical simulation of PM adhesion characteristics in a fluidized bed type PM removal device by a finite volume Eulerian–Eulerian method, Powder Technology, Volume 288, January 2016, Pages 26-34, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.10.033.

24.

Seyed Ahmad Kia, Javad Aminian, Hydrodynamic modeling strategy for dense to dilute gas–solid fluidized beds, Particuology, Available online 9 November 2016, ISSN 1674-2001, http://dx.doi.org/10.1016/j.partic.2016.06.004.

25.

A. Bakshi, C. Altantzis, R.B. Bates, A.F. Ghoniem, Study of the effect of reactor scale on fluidization hydrodynamics using fine-grid CFD simulations based on the two-fluid model, Powder Technology, Volume 299, October 2016, Pages 185-198, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2016.05.029.

26.

M. Anil, S. Rupesh, C. Muraleedharan, P. Arun, Performance Evaluation of Fluidised Bed Biomass Gasifier Using CFD, Energy Procedia, Volume 90, December 2016, Pages 154-162, ISSN 1876-6102, http://dx.doi.org/10.1016/j.egypro.2016.11.180.

27.

Wei Zhang, Changfu You, Numerical simulation of particulate flows in CFB riser with drag corrections based on particle distribution characterization, Chemical Engineering Journal, Volume 303, 1 November 2016, Pages 145-155, ISSN 1385-8947, http://dx.doi.org/10.1016/j.cej.2016.05.139.

28.

Juray De Wilde, George Richards, Sofiane Benyahia, Qualitative numerical study of simultaneous high-G-intensified gas–solids contact, separation and segregation in a bi-disperse rotating fluidized bed in a vortex chamber, Advanced Powder Technology, Volume 27, Issue 4, July 2016, Pages 1453-1463, ISSN 0921-8831, http://dx.doi.org/10.1016/j.apt.2016.05.005.

29.

A. Bakshi, C. Altantzis, R.B. Bates, A.F. Ghoniem, Multiphase-flow Statistics using 3D Detection and Tracking Algorithm (MS3DATA): Methodology and application to large-scale fluidized beds, Chemical Engineering Journal, Volume 293, 1 June 2016, Pages 355-364, ISSN 1385-8947, http://dx.doi.org/10.1016/j.cej.2016.02.058.

30.

Balaji Gopalan, Mehrdad Shahnam, Rupen Panday, Jonathan Tucker, Frank Shaffer, Lawrence Shadle, Joseph Mei, William Rogers, Chris Guenther, Madhava Syamlal, Measurements of pressure drop and particle velocity in a pseudo 2-D rectangular bed with Geldart Group D particles, Powder Technology, Volume 291, April 2016, Pages 299-310, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.12.040.

31.

Guodong Liu, Fan Yu, Huilin Lu, Shuai Wang, Pengwei Liao, Zhenhua Hao, CFD-DEM simulation of liquid-solid fluidized bed with dynamic restitution coefficient, Powder Technology, Volume 304, December 2016, Pages 186-197, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2016.08.058.

32.

Shuai Wang, Juhui Chen, Qi Wang, Guodong Liu, Huilin Lu, Liyan Sun, Evaluation of a bubble-structure dependent drag model for the simulation of bubbling fluidization with Geldart A particles, Powder Technology, Volume 289, February 2016, Pages 44-51, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.11.024.

33.

Shuai Wang, Qi Wang, Juhui Chen, Guodong Liu, Huilin Lu, Liyan Sun, Assessment of CO2 capture using potassium-based sorbents in circulating fluidized bed reactor by multiscale modeling, Fuel, Volume 164, 15 January 2016, Pages 66-72, ISSN 0016-2361, http://dx.doi.org/10.1016/j.fuel.2015.10.002.

34.

Avik Sarkar, Fernando E. Milioli, Shailesh Ozarkar, Tingwen Li, Xin Sun, Sankaran Sundaresan, Filtered sub-grid constitutive models for fluidized gas-particle flows constructed from 3-D simulations, Chemical Engineering Science, Volume 152, 2 October 2016, Pages 443-456, ISSN 0009-2509, http://dx.doi.org/10.1016/j.ces.2016.06.023.

35.

Shuai Wang, Qi Wang, Juhui Chen, Guodong Liu, Huilin Lu, Liyan Sun, Extension of cluster-structure dependent drag model to simulation of riser with Geldart B particles, Advanced Powder Technology, Volume 27, Issue 1, January 2016, Pages 57-63, ISSN 0921-8831, http://dx.doi.org/10.1016/j.apt.2015.10.015.

36.

Aaron M. Lattanzi, Christine M. Hrenya, A coupled, multiphase heat flux boundary condition for the discrete element method, Chemical Engineering Journal, Volume 304, 15 November 2016, Pages 766-773, ISSN 1385-8947, http://dx.doi.org/10.1016/j.cej.2016.07.004.

37.

Shuyan Wang, Xu Wang, Ruichen Wang, Juntian Zhao, Shuren Yang, Yang Liu, Qun Dong, Simulations of flow behavior of particles in a liquid-solid fluidized bed using a second-order moments model, Powder Technology, Volume 302, November 2016, Pages 21-32, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2016.08.019.

38.

Shigan Chu, Andrea Prosperetti, On flux terms in volume averaging, International Journal of Multiphase Flow, Volume 80, April 2016, Pages 176-180, ISSN 0301-9322, http://dx.doi.org/10.1016/j.ijmultiphaseflow.2015.12.009.

39.

Qingang Xiong, Fei Xu, Emilio Ramirez, Sreekanth Pannala, C. Stuart Daw, Modeling the impact of bubbling bed hydrodynamics on tar yield and its fluctuations during biomass fast pyrolysis, Fuel, Volume 164, 15 January 2016, Pages 11-17, ISSN 0016-2361, http://dx.doi.org/10.1016/j.fuel.2015.09.074.

40.

Qingang Xiong, Jingchao Zhang, Fei Xu, Gavin Wiggins, C. Stuart Daw, Coupling DAEM and CFD for simulating biomass fast pyrolysis in fluidized beds, Journal of Analytical and Applied Pyrolysis, Volume 117, January 2016, Pages 176-181, ISSN 0165-2370, http://dx.doi.org/10.1016/j.jaap.2015.11.015.

41.

Peiyuan Liu, Casey Q. LaMarche, Kevin M. Kellogg, Christine M. Hrenya, Fine-particle defluidization: Interaction between cohesion, Young׳s modulus and static bed height, Chemical Engineering Science, Volume 145, 12 May 2016, Pages 266-278, ISSN 0009-2509, http://dx.doi.org/10.1016/j.ces.2016.02.024.

42.

Mohsen Fattahi, Seyyed Hossein Hosseini, Goodarz Ahmadi, CFD simulation of transient gas to particle heat transfer for fluidized and spouted regimes, Applied Thermal Engineering, Volume 105, 25 July 2016, Pages 385-396, ISSN 1359-4311, http://dx.doi.org/10.1016/j.applthermaleng.2015.05.071.

43.

Guoqiang Chen, Qinglin Su, Zhenghong Luo, Modeling the electrostatic effect on the hydrodynamic behavior in FCC risers: From understanding to application, Particuology, Volume 25, April 2016, Pages 122-132, ISSN 1674-2001, http://dx.doi.org/10.1016/j.partic.2015.05.008.

44.

F. Hernández-Jiménez, J. Sánchez-Prieto, E. Cano-Pleite, L.M. Garcia-Gutierrez, A. Acosta-Iborra, Development of an empirical wall-friction model for 2D simulations of pseudo-2D bubbling fluidized beds, Advanced Powder Technology, Volume 27, Issue 2, March 2016, Pages 521-530, ISSN 0921-8831, http://dx.doi.org/10.1016/j.apt.2016.02.001.

45.

Kunzan Qiu, Chenshu Hu, Shiliang Yang, Kun Luo, Ke Zhang, Jianren Fan, Computational evaluation of depth effect on the hydrodynamics of slot-rectangular spouted bed, Powder Technology, Volume 287, January 2016, Pages 51-60, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.09.034.

46.

Nan Gui, Xingtuan Yang, Jiyuan Tu, Shengyao Jiang, A generalized particle-to-wall collision model for non-spherical rigid particles, Advanced Powder Technology, Volume 27, Issue 1, January 2016, Pages 154-163, ISSN 0921-8831, http://dx.doi.org/10.1016/j.apt.2015.12.002.

47.

O.O. Ayeni, C.L. Wu, K. Nandakumar, J.B. Joshi, Development and validation of a new drag law using mechanical energy balance approach for DEM–CFD simulation of gas–solid fluidized bed, Chemical Engineering Journal, Volume 302, 15 October 2016, Pages 395-405, ISSN 1385-8947, http://dx.doi.org/10.1016/j.cej.2016.05.056.

48.

Kun Hong, Sheng Chen, Wei Wang, Jinghai Li, Fine-grid two-fluid modeling of fluidization of Geldart A particles, Powder Technology, Volume 296, August 2016, Pages 2-16, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.07.003.

49.

Jinghai Li, Wei Ge, Wei Wang, Ning Yang, Wenlai Huang, Focusing on mesoscales: from the energy-minimization multiscale model to mesoscience, Current Opinion in Chemical Engineering, Volume 13, August 2016, Pages 10-23, ISSN 2211-3398, http://dx.doi.org/10.1016/j.coche.2016.07.008.

50.

N. Setarehshenas, S.H. Hosseini, M. Nasr Esfahany, G. Ahmadi, Impacts of solid-phase wall boundary condition on CFD simulation of conical spouted beds containing heavy zirconia particles, Journal of the Taiwan Institute of Chemical Engineers, Volume 64, July 2016, Pages 146-156, ISSN 1876-1070, http://dx.doi.org/10.1016/j.jtice.2016.04.005.

51.

Yurong He, Wengen Peng, Tianqi Tang, Shengnan Yan, Yunhua Zhao, DEM numerical simulation of wet cohesive particles in a spout fluid bed, Advanced Powder Technology, Volume 27, Issue 1, January 2016, Pages 93-104, ISSN 0921-8831, http://dx.doi.org/10.1016/j.apt.2015.10.022.

52.

Lingyi Meng, Yang Jiao, Shuixiang Li, Maximally dense random packings of spherocylinders, Powder Technology, Volume 292, May 2016, Pages 176-185, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2016.01.036.

53.

Wenguang Nan, Yueshe Wang, Jianzhong Wang, Numerical analysis on the fluidization dynamics of rodlike particles, Advanced Powder Technology, Volume 27, Issue 5, September 2016, Pages 2265-2276, ISSN 0921-8831, http://dx.doi.org/10.1016/j.apt.2016.08.015.

54.

Mohammad Mehrabadi, Sudheer Tenneti, Shankar Subramaniam, Importance of the fluid-particle drag model in predicting segregation in bidisperse gas-solid flow, International Journal of Multiphase Flow, Volume 86, November 2016, Pages 99-114, ISSN 0301-9322, http://dx.doi.org/10.1016/j.ijmultiphaseflow.2016.07.006.

55.

Cesar M. Venier, Santiago Marquez Damian, Norberto M. Nigro, Numerical aspects of Eulerian gas–particles flow formulations, Computers & Fluids, Volume 133, 15 July 2016, Pages 151-169, ISSN 0045-7930, http://dx.doi.org/10.1016/j.compfluid.2016.05.003.

56.

Wenqi Zhong, Aibing Yu, Guanwen Zhou, Jun Xie, Hao Zhang, CFD simulation of dense particulate reaction system: Approaches, recent advances and applications, Chemical Engineering Science, Volume 140, 2 February 2016, Pages 16-43, ISSN 0009-2509, http://dx.doi.org/10.1016/j.ces.2015.09.035.

57.

V. M. K. Kotteda, A. Chattopadhyay, V. Kumar and W. Spotz, “A framework to integrate MFiX with Trilinos for high fidelity fluidized bed computations,” 2016 IEEE High Performance Extreme Computing Conference (HPEC), Waltham, MA, 2016, pp. 1-6. doi: 10.1109/HPEC.2016.7761603

58.

Liu, D., van Wachem, B. G. M., Mudde, R. F., Chen, X. and van Ommen, J. R. (2016), An adhesive CFD-DEM model for simulating nanoparticle agglomerate fluidization. AIChE J., 62: 2259–2270. doi:10.1002/aic.15219

59.

Xu, H. P., Zhao, H. B. and Zheng, C. G., Numerical Simulation of an Entrained Flow Gasifier by an Eulerian Model, Clean Coal Technology and Sustainable Development: Proceedings of the 8th International Symposium on Coal Combustion, 2016, pages 585-590, http://dx.doi.org/10.1007/978-981-10-2023-0_79

 

60.

 Aytekin Gel, Mehrdad Shahnam, Jordan Musser, Arun K. Subramaniyan, and Jean-François Dietiker, Nonintrusive Uncertainty Quantification of Computational Fluid Dynamics Simulations of a Bench-Scale Fluidized-Bed Gasifier, Industrial & Engineering Chemistry Research 2016 55 (48), 12477-12490, DOI: 10.1021/acs.iecr.6b02506

61.

Xu, W., & Sun, X. A Discrete Element Model of Armor Glass Fragmentation and Comminution Failure Under Compression. International Journal of Applied Glass Science. Volume 7, Issue 4
December 2016 , Pages 503–512, http://dx.doi.org/10.1111/ijag.12184

62.

Liu, Peiyuan; Brown, Timothy ; Fullmer, William D. ; Hauser, Thomas ; Hrenya, Christine ; Grout, Ray ; Sitaraman, Hariswaran, Comprehensive Benchmark Suite for Simulation of Particle Laden Flows Using the Discrete Element Method with Performance Profiles from the Multiphase Flow with Interface eXchanges (MFiX) Code, NREL/TP–2C00-65637, http://dx.doi.org/10.2172/1237833

63.

Michaelides EE, Crowe CT, Schwarzkopf JD, editors. Multiphase Flow Handbook, Taylor & Francis Group, CRC Press 2016, Pages 79–284, Print ISBN: 978-1-4987-0100-6, eBook ISBN: 978-1-4987-0101-3, DOI: 10.1201/9781315371924-3

64.

Lu, L., Yoo, K., Benyahia, S., Coarse-Grained-Particle Method for Simulation of Liquid–Solids Reacting Flows. Industrial & Engineering Chemistry Research 55, 10477-10491, 2016. http://pubs.acs.org/doi/abs/10.1021/acs.iecr.6b02688

Publication Year 2015

1.

Marcelo José Alba, Flavio Clareth Colman, Luiz Mário de Matos Jorge, Alexandre M. S. Costa, Paulo Roberto Paraíso. Numerical study of a bubbling fluidized bed using a combined CFD-DEM code. 23rd ABCM International Congress of Mechanical Engineering, 2015, Rio de Janeiro, RJ, Brazil, https://doi.org/10.13140/RG.2.1.3086.3124

2.

Ahmadreza Abbasi Baharanchi, Seckin Gokaltun, George Dulikravich, Performance improvement of existing drag models in two-fluid modeling of gas–solid flows using a PR-DNS based drag model, Powder Technology, Volume 286, December 2015, Pages 257-268, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.07.001.

3.

Tingwen Li, Validation of a 2.5D CFD model for cylindrical gas–solids fluidized beds, Powder Technology, Volume 286, December 2015, Pages 817-827, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.09.033.

4.

Jordan Musser, Madhava Syamlal, Mehrdad Shahnam, David Huckaby, Constitutive equation for heat transfer caused by mass transfer, Chemical Engineering Science, Volume 123, 17 February 2015, Pages 436-443, ISSN 0009-2509, http://dx.doi.org/10.1016/j.ces.2014.11.036.

5.

Aniruddha Choudhary, Christopher J. Roy, Jean-François Dietiker, Mehrdad Shahnam, Rahul Garg, Jordan Musser, Code Verification for Multiphase Flows Using the Method of Manufactured Solutions, International Journal of Multiphase Flow, Available online 23 December 2015, ISSN 0301-9322, http://dx.doi.org/10.1016/j.ijmultiphaseflow.2015.12.006.

6.

Li Peng, Yingya Wu, Chengxiu Wang, Jinsen Gao, Xingying Lan, 2.5D CFD simulations of gas–solids flow in cylindrical CFB risers, Powder Technology, Available online 31 December 2015, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.12.018.

7.

Tingwen Li, Sofiane Benyahia, Jean-François Dietiker, Jordan Musser, Xin Sun, A 2.5D computational method to simulate cylindrical fluidized beds, Chemical Engineering Science, Volume 123, 17 February 2015, Pages 236-246, ISSN 0009-2509, http://dx.doi.org/10.1016/j.ces.2014.11.022.

8.

Farzaneh Jalalinejad, Xiaotao T. Bi, John R. Grace, Effect of electrostatics on interaction of bubble pairs in a fluidized bed, Advanced Powder Technology, Volume 26, Issue 1, January 2015, Pages 329-334, ISSN 0921-8831, http://dx.doi.org/10.1016/j.apt.2014.10.015.

9.

Anna Trendewicz, Robert Braun, Abhijit Dutta, Jack Ziegler, Corrigendum to “One dimensional steady-state circulating fluidized-bed reactor model for biomass fast pyrolysis” [Fuel 133 (2014) 253–262], Fuel, Volume 144, 15 March 2015, Pages 439-440, ISSN 0016-2361, http://dx.doi.org/10.1016/j.fuel.2014.12.053.

10.

Farzaneh Jalalinejad, Xiaotao T. Bi, John R. Grace, Comparison of theory with experiment for single bubbles in charged fluidized particles, Powder Technology, Available online 17 December 2015, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.12.014.

11.

Farzaneh Jalalinejad, Xiaotao T. Bi, John R. Grace, Effect of electrostatics on freely-bubbling beds of mono-sized particles, International Journal of Multiphase Flow, Volume 70, April 2015, Pages 104-112, ISSN 0301-9322, http://dx.doi.org/10.1016/j.ijmultiphaseflow.2014.11.007.

12.

Xuesong Lu, Chris M. Boyce, Stuart A. Scott, John S. Dennis, Daniel J. Holland, Investigation of Two-fluid Models of Fluidisation Using Magnetic Resonance and Discrete Element Simulations, Procedia Engineering, Volume 102, 2015, Pages 1436-1445, ISSN 1877-7058, http://dx.doi.org/10.1016/j.proeng.2015.01.277.

13.

Shuyan Wang, Qian Yang, Baoli Shao, Jian Zhao, Lili Liu, Yikun Liu, Numerical simulation of horizontal jet penetration using filtered fluid model in gas–solid fluidized bed, Powder Technology, Volume 276, May 2015, Pages 1-9, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.02.009.

14.

Tingwen Li, Yongmin Zhang, Fernando Hernández-Jiménez, Investigation of particle–wall interaction in a pseudo-2D fluidized bed using CFD-DEM simulations, Particuology, Available online 11 September 2015, ISSN 1674-2001, http://dx.doi.org/10.1016/j.partic.2015.06.001.

15.

A.B. Morris, S. Pannala, Z. Ma, C.M. Hrenya, A conductive heat transfer model for particle flows over immersed surfaces, International Journal of Heat and Mass Transfer, Volume 89, October 2015, Pages 1277-1289, ISSN 0017-9310, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2015.06.004.

16.

Maryam Askarishahi, Mohammad-Sadegh Salehi, Hamid Reza Godini, Günter Wozny, CFD study on solids flow pattern and solids mixing characteristics in bubbling fluidized bed: Effect of fluidization velocity and bed aspect ratio, Powder Technology, Volume 274, April 2015, Pages 379-392, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.01.025.

17.

Matthew R. Sweeney, Greg A. Valentine, Transport and mixing dynamics from explosions in debris-filled volcanic conduits: Numerical results and implications for maar-diatreme volcanoes, Earth and Planetary Science Letters, Volume 425, 1 September 2015, Pages 64-76, ISSN 0012-821X, http://dx.doi.org/10.1016/j.epsl.2015.05.038.

18.

X. Hu, A. Passalacqua, R.O. Fox, Application of quadrature-based uncertainty quantification to the NETL small-scale challenge problem SSCP-I, Powder Technology, Volume 272, March 2015, Pages 100-112, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2014.11.030.

19.

F. Hernández-Jiménez, L.M. García-Gutiérrez, A. Soria-Verdugo, A. Acosta-Iborra, Fully coupled TFM-DEM simulations to study the motion of fuel particles in a fluidized bed, Chemical Engineering Science, Volume 134, 29 September 2015, Pages 57-66, ISSN 0009-2509, http://dx.doi.org/10.1016/j.ces.2015.04.028.

20.

Jian Cai, Masato Handa, Michael F. Modest, Eulerian–Eulerian multi-fluid methods for pulverized coal flames with nongray radiation, Combustion and Flame, Volume 162, Issue 4, April 2015, Pages 1550-1565, ISSN 0010-2180, http://dx.doi.org/10.1016/j.combustflame.2014.11.023.

21.

Qinggong Wang, Hairui Yang, Yuqing Feng, Peter J. Witt, Junfu Lu, Weidi Yin, Qing Liu, Lubin Wei, Numerical study of the effect of operation parameters on particle segregation in a coal beneficiation fluidized bed by a TFM–DEM hybrid model, Chemical Engineering Science, Volume 131, 28 July 2015, Pages 256-270, ISSN 0009-2509, http://dx.doi.org/10.1016/j.ces.2015.03.063.

22.

Meisam Farzaneh, Alf-Erik Almstedt, Filip Johnsson, David Pallarès, Srdjan Sasic, The crucial role of frictional stress models for simulation of bubbling fluidized beds, Powder Technology, Volume 270, Part A, January 2015, Pages 68-82, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2014.09.050.

23.

Balaji Gopalan, Mehrdad Shahnam, Rupen Panday, Jonathan Tucker, Frank Shaffer, Lawrence Shadle, Joseph Mei, William Rogers, Chris Guenther, Madhava Syamlal, Measurements of pressure drop and particle velocity in a pseudo 2-D rectangular bed with Geldart Group D particles, Powder Technology, Available online 31 December 2015, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.12.040.

24.

Shigan Chu, Andrea Prosperetti, On flux terms in volume averaging, International Journal of Multiphase Flow, Available online 31 December 2015, ISSN 0301-9322, http://dx.doi.org/10.1016/j.ijmultiphaseflow.2015.12.009.

25.

Caterina Gonçalves Philippsen, Antônio Cezar Faria Vilela, Leandro Dalla Zen, Fluidized bed modeling applied to the analysis of processes: review and state of the art, Journal of Materials Research and Technology, Volume 4, Issue 2, April–June 2015, Pages 208-216, ISSN 2238-7854, http://dx.doi.org/10.1016/j.jmrt.2014.10.018.

26.

Yu Ri Lee, Hang Seok Choi, Hoon Chae Park, Ji Eun Lee, A numerical study on biomass fast pyrolysis process: A comparison between full lumped modeling and hybrid modeling combined with CFD, Computers & Chemical Engineering, Volume 82, 2 November 2015, Pages 202-215, ISSN 0098-1354, http://dx.doi.org/10.1016/j.compchemeng.2015.07.007.

27.

Qingang Xiong, Jingchao Zhang, Fei Xu, Gavin Wiggins, C. Stuart Daw, Coupling DAEM and CFD for simulating biomass fast pyrolysis in fluidized beds, Journal of Analytical and Applied Pyrolysis, Available online 3 December 2015, ISSN 0165-2370, http://dx.doi.org/10.1016/j.jaap.2015.11.015.

28.

Shuai Wang, Qi Wang, Juhui Chen, Guodong Liu, Huilin Lu, Liyan Sun, Extension of cluster-structure dependent drag model to simulation of riser with Geldart B particles, Advanced Powder Technology, Available online 6 November 2015, ISSN 0921-8831, http://dx.doi.org/10.1016/j.apt.2015.10.015.

29.

A. Bakshi, C. Altantzis, R.B. Bates, A.F. Ghoniem, Eulerian–Eulerian simulation of dense solid–gas cylindrical fluidized beds: Impact of wall boundary condition and drag model on fluidization, Powder Technology, Volume 277, June 2015, Pages 47-62, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.02.056.

30.

Yunhua Zhao, Bing Lu, Yingjie Zhong, Influence of collisional parameters for rough particles on simulation of a gas-fluidized bed using a two-fluid model, International Journal of Multiphase Flow, Volume 71, May 2015, Pages 1-13, ISSN 0301-9322, http://dx.doi.org/10.1016/j.ijmultiphaseflow.2014.12.002.

31.

Nan Gui, Xingtuan Yang, Jiyuan Tu, Shengyao Jiang, A generalized particle-to-wall collision model for non-spherical rigid particles, Advanced Powder Technology, Available online 15 December 2015, ISSN 0921-8831, http://dx.doi.org/10.1016/j.apt.2015.12.002.

32.

Diego Perrone, Mario Amelio, A Preliminary Study of Hydrodynamics and Heat Transfer in a Bubbling Fluidized Bed Containing Sand Particle Using CFD, Energy Procedia, Volume 81, December 2015, Pages 1041-1054, ISSN 1876-6102, http://dx.doi.org/10.1016/j.egypro.2015.12.113.

33.

Oyebanjo Oke, Paola Lettieri, Piero Salatino, Roberto Solimene, Luca Mazzei, Eulerian Modeling of Lateral Solid Mixing in Gas-fluidized Suspensions, Procedia Engineering, Volume 102, 2015, Pages 1491-1499, ISSN 1877-7058, http://dx.doi.org/10.1016/j.proeng.2015.01.283.

34.

Qinggong Wang, Weidi Yin, Hairui Yang, Junfu Lu, Bin Zhao, Numerical study on the effect of fine coal accumulation in a coal beneficiation fluidized bed, Powder Technology, Volume 283, October 2015, Pages 570-578, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.06.007.

35.

Shuai Wang, Juhui Chen, Huilin Lu, Guodong Liu, Liyan Sun, Multi-scale simulation of chemical looping combustion in dual circulating fluidized bed, Applied Energy, Volume 155, 1 October 2015, Pages 719-727, ISSN 0306-2619, http://dx.doi.org/10.1016/j.apenergy.2015.05.109.

36.

Guoqiang Chen, Qinglin Su, Zhenghong Luo, Modeling the electrostatic effect on the hydrodynamic behavior in FCC risers: From understanding to application, Particuology, Available online 11 September 2015, ISSN 1674-2001, http://dx.doi.org/10.1016/j.partic.2015.05.008.

37.

Youjun Lu, Jikai Huang, Pengfei Zheng, A CFD–DEM study of bubble dynamics in fluidized bed using flood fill method, Chemical Engineering Journal, Volume 274, 15, August 2015, Pages 123-131, ISSN 1385-8947, http://dx.doi.org/10.1016/j.cej.2015.03.117.

38.

Qinggong Wang, Timo Niemi, Juho Peltola, Sirpa Kallio, Hairui Yang, Junfu Lu, Lubin Wei, Particle size distribution in CPFD modeling of gas–solid flows in a CFB riser, Particuology, Volume 21, August 2015, Pages 107-117, ISSN 1674-2001, http://dx.doi.org/10.1016/j.partic.2014.06.009.

39.

R. Berger, C. Kloss, A. Kohlmeyer, S. Pirker, Hybrid parallelization of the LIGGGHTS open-source DEM code, Powder Technology, Volume 278, July 2015, Pages 234-247, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.03.019.

40.

Bruno Blais, François Bertrand, On the use of the method of manufactured solutions for the verification of CFD codes for the volume-averaged Navier–Stokes equations, Computers & Fluids, Volume 114, 2 July 2015, Pages 121-129, ISSN 0045-7930, http://dx.doi.org/10.1016/j.compfluid.2015.03.002.

41.

Seyyed Hossein Hosseini, Mohsen Fattahi, Goodarz Ahmadi, Hydrodynamics studies of a pseudo 2D rectangular spouted bed by CFD, Powder Technology, Volume 279, July 2015, Pages 301-309, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.04.013.

42.

Mohsen Fattahi, Seyyed Hossein Hosseini, Goodarz Ahmadi, CFD simulation of transient gas to particle heat transfer for fluidized and spouted regimes, Applied Thermal Engineering, Available online 5 June 2015, ISSN 1359-4311, http://dx.doi.org/10.1016/j.applthermaleng.2015.05.071.

43.

Ahmed Ramzy, Ravikiran Kadoli, Modified PGC model and its validation by experiments for heat and moisture transfer analysis in a vertical fluidized desiccant bed, Applied Thermal Engineering, Volume 81, 25 April 2015, Pages 83-91, ISSN 1359-4311, http://dx.doi.org/10.1016/j.applthermaleng.2015.02.018.

44.

Kun Luo, Fan Wu, Shiliang Yang, Jianren Fan, CFD–DEM study of mixing and dispersion behaviors of solid phase in a bubbling fluidized bed, Powder Technology, Volume 274, April 2015, Pages 482-493, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.01.046.

45.

Yurong He, Wengen Peng, Tianqi Tang, Shengnan Yan, Yunhua Zhao, DEM numerical simulation of wet cohesive particles in a spout fluid bed, Advanced Powder Technology, Available online 14 November 2015, ISSN 0921-8831, http://dx.doi.org/10.1016/j.apt.2015.10.022.

46.

Qinggong Wang, Yuqing Feng, Junfu Lu, Weidi Yin, Hairui Yang, Peter J. Witt, Man Zhang, Numerical study of particle segregation in a coal beneficiation fluidized bed by a TFM–DEM hybrid model: Influence of coal particle size and density, Chemical Engineering Journal, Volume 260, 15 January 2015, Pages 240-257, ISSN 1385-8947, http://dx.doi.org/10.1016/j.cej.2014.08.052.

47.

C. Altantzis, R.B. Bates, A.F. Ghoniem, 3D Eulerian modeling of thin rectangular gas–solid fluidized beds: Estimation of the specularity coefficient and its effects on bubbling dynamics and circulation times, Powder Technology, Volume 270, Part A, January 2015, Pages 256-270, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2014.10.029.

48.

Kun Hong, Sheng Chen, Wei Wang, Jinghai Li, Fine-grid two-fluid modeling of fluidization of Geldart A particles, Powder Technology, Available online 9 July 2015, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.07.003.

49.

Darius Markauskas, Arnas Kačeniauskas, The comparison of two domain repartitioning methods used for parallel discrete element computations of the hopper discharge, Advances in Engineering Software, Volume 84, June 2015, Pages 68-76, ISSN 0965-9978, http://dx.doi.org/10.1016/j.advengsoft.2014.12.002.

50.

T.M. Ismail, M. Abd El-Salam, Numerical and experimental studies on updraft gasifier HTAG, Renewable Energy, Volume 78, June 2015, Pages 484-497, ISSN 0960-1481, http://dx.doi.org/10.1016/j.renene.2015.01.032.

51.

Yuli Zhang, Mao Ye, Yinfeng Zhao, Tong Gu, Rui Xiao, Zhongmin Liu, Emulsion phase expansion of Geldart a particles in bubbling fluidized bed methanation reactors: A CFD–DEM study, Powder Technology, Volume 275, May 2015, Pages 199-210, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.01.064.

52.

Sergey Zabelok, Robert Arslanbekov, Vladimir Kolobov, Adaptive kinetic-fluid solvers for heterogeneous computing architectures, Journal of Computational Physics, Volume 303, 15 December 2015, Pages 455-469, ISSN 0021-9991, http://dx.doi.org/10.1016/j.jcp.2015.10.003.

53.

Benjamin Amblard, Stéphane Bertholin, Carole Bobin, Thierry Gauthier, Development of an attrition evaluation method using a Jet Cup rig, Powder Technology, Volume 274, April 2015, Pages 455-465, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.01.001.

54.

Shiliang Yang, Kun Luo, Ke Zhang, Kunzan Qiu, Jianren Fan, Numerical study of a lab-scale double slot-rectangular spouted bed with the parallel CFD–DEM coupling approach, Powder Technology, Volume 272, March 2015, Pages 85-99, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2014.11.035.

55.

Jan Marti, Andreas Haselbacher, Aldo Steinfeld, A numerical investigation of gas-particle suspensions as heat transfer media for high-temperature concentrated solar power, International Journal of Heat and Mass Transfer, Volume 90, November 2015, Pages 1056-1070, ISSN 0017-9310, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2015.07.033.

56.

E. Cano-Pleite, F. Hernández-Jiménez, A. Acosta-Iborra, Compressible-gas two-fluid modeling of isolated bubbles in a vertically vibrated fluidized bed and comparison with experiments, Chemical Engineering Journal, Volume 271, 1 July 2015, Pages 287-299, ISSN 1385-8947, http://dx.doi.org/10.1016/j.cej.2015.02.096.

57.

Michael A. Martin, Chien-Fan Chen, Partha P. Mukherjee, Sreekanth Pannala, Jean-Francois Dietiker, John A. Turner, and Devesh Ranjan, “Morphological Influence in Lithium-Ion Battery 3D Electrode Architectures”, J. Electrochem. Soc. 2015 162(6): A991-A1002; doi:10.1149/2.0631506jes.

58.

Alexandre M. S. Costa, Flavio Clareth Colman, Marcelo José Alba, Paulo Roberto Paraíso, Luiz Mário de Matos Jorge. Horizontal gas-solid pneumatic transport: the effect of hydrodynamics using computational fluid dynamics. 23rd ABCM International Congress of Mechanical Engineering, 2015, Rio de Janeiro, RJ, Brazil, https://doi.org/10.13140/RG.2.1.4683.7522

59.

Qingluan Xue, Rodney O. Fox, Computational Modeling of Biomass Thermochemical Conversion in Fluidized Beds: Particle Density Variation and Size Distribution, Industrial & Engineering Chemistry Research 2015 54 (16), 4084-4094, doi: 10.1021/ie503806p  

Publication Year 2014

1.

Mitrano P. P., Zenk J. R., Benyahia S., Galvin J. E., Dahl S. R., Hrenya C. M. Kinetic-theory predictions of clustering instabilities in granular flows: beyond the small-Knudsen-number regime. Journal of Fluid Mechanics. 2014 Jan;738. http://dx.doi.org/10.1017/jfm.2013.602 .

2.

Holloway William, Sundaresan Sankaran. Filtered models for bidisperse gas-particle flows. Chemical Engineering Science. 2014 Apr 28;108:67-86. http://dx.doi.org/10.1016/j.ces.2013.12.037.

3.

Galvin Janine E., Benyahia Sofiane. The Effect of Cohesive Forces on the Fluidization of Aeratable Powders. Aiche Journal. 2014 Feb;60(2):473-84. http://dx.doi.org/10.1002/aic.14307.

4.

P.J. Abrahamsson, S. Sasic, A. Rasmuson, On continuum modeling using kinetic-frictional models in high shear granulation, Particuology, Volume 13, April 2014, Pages 124-127.http://dx.doi.org/10.1016/j.partic.2013.06.001 .

5.

Agarwal, Khushbu, Poorva Sharma, Jinliang Ma, Chaomei Lo, Ian Gorton, and Yan Liu. 2014. Reveal: An extensible reduced-order model builder for simulation and modeling. Computing in Science & Engineering 16, (2): 44-53. http://dx.doi.org/10.1109/MCSE.2013.46 .

6.

Fabio Dioguardi, Pierfrancesco Dellino, Daniela Mele, Integration of a new shape-dependent particle-fluid drag coefficient law in the multiphase Eulerian-Lagrangian code MFIX-DEM, Powder Technology, Volume 260, July 2014, Pages 68-77. http://dx.doi.org/10.1016/j.powtec.2014.03.071.

7.

Du, Juan, Soham Dutta, and Birger Erik Ydstie. 2014. Modeling and control of solar?grade silicon production in a fluidized bed reactor. AIChE Journal 60, (5): 1740-1751.. http://dx.doi.org/10.1002/aic.14378 .

8.

F. Hernandez-Jimenez, T. Li, E. Cano-Pleite, W. Rogers, A. Acosta-Iborra, Characterization of the particle-wall frictional forces in pseudo-2D fluidized beds using DEM, Chemical Engineering Science, Volume 116, 6 September 2014, Pages 136-143. http://dx.doi.org/10.1016/j.ces.2014.04.033.

9.

Lee, Ji Eun, Hang Seok Choi, and Yong Chil Seo. 2014. Study of hydrodynamic characteristics in a circulating fluidized bed gasifier for plastic waste by computational fluid dynamics modeling and simulation. Journal of Material Cycles and Waste Management 16, (4): 665-676.. http://dx.doi.org/10.1007/s10163-014-0275-5 .

10.

Tingwen Li, Jean-Francois Dietiker, Lawrence Shadle, Comparison of full-loop and riser-only simulations for a pilot-scale circulating fluidized bed riser, Chemical Engineering Science, Volume 120, 16 December 2014, Pages 10-21. http://dx.doi.org/10.1016/j.ces.2014.08.041.

11.

Tingwen Li, Sreekanth Pannala, Mehrdad Shahnam, CFD simulations of circulating fluidized bed risers, part II, evaluation of differences between 2D and 3D simulations, Powder Technology, Volume 254, March 2014, Pages 115-124. http://dx.doi.org/10.1016/j.powtec.2014.01.022 .

12.

Peiyuan Liu, Christine M. Hrenya, Challenges of DEM: I. Competing bottlenecks in parallelization of gas-solid flows, Powder Technology, Volume 264, September 2014, Pages 620-626. http://dx.doi.org/10.1016/j.powtec.2014.04.095.

13.

Handan Liu, Danesh K. Tafti, Tingwen Li, Hybrid parallelism in MFIX CFD-DEM using OpenMP, Powder Technology, Volume 259, June 2014, Pages 22-29. http://dx.doi.org/10.1016/j.powtec.2014.03.047.

14.

Chanchal Loha, Himadri Chattopadhyay, Pradip K. Chatterjee, Effect of coefficient of restitution in Euler-Euler CFD simulation of fluidized-bed hydrodynamics, Particuology, Volume 15, August 2014, Pages 170-177.http://dx.doi.org/10.1016/j.partic.2013.07.001 .

15.

Andreza Tangerino Mineto , Meire Pereira de Souza Braun , Helio Aparecido Navarro , Luben Cabezas-Gomez.Influence Of The Granular Temperature In The Numerical Simulation Of Gas-Solid Flow In A Bubbling Fluidized Bed. Chemical Engineering Communications, Volume 201, Issue 8, August 2014.http://dx.doi.org/10.1080/00986445.2013.794138.

16.

Thomas J. O’Brien, A multiphase turbulence theory for gas-solid flows: I. Continuity and momentum equations with Favre-averaging, Powder Technology, Volume 265, October 2014, Pages 83-87. http://dx.doi.org/10.1016/j.powtec.2014.01.030.

17.

Rangarajan D, Shiozawa T, Shen Y, Curtis JS, Yu A. Influence of operating parameters on raceway properties in a model blast furnace using two-fluid model. Ind Eng Chem , 2014,53,4983-4990.http://dx.doi.org/10.1021/ie301936r .

18.

Sweeney, Matthew R. A Numerical Determination of Debris Jet Length Scales and Depositional Structures in Diatremes. Master of Science Thesis, State University of New York at Buffalo, 2014.

19.

Teaters Lindsey C., Battaglia Francine. On the Computational Modeling of Unfluidized and Fluidized Bed Dynamics J. Fluids Eng. 136(10), 104501 (2014). http://dx.doi.org/10.1115/1.4027437.

20.

Anna Trendewicz, Robert Braun, Abhijit Dutta, Jack Ziegler, One dimensional steady-state circulating fluidized-bed reactor model for biomass fast pyrolysis, Fuel, Volume 133, 1 October 2014, Pages 253-262.http://dx.doi.org/10.1016/j.fuel.2014.05.009.

21.

Verma, Vikrant, Johan T. Padding, Niels G. Deen, J. A. M. (Hans) Kuipers, Frank Barthel, Martina Bieberle, Michael Wagner, and Uwe Hampel. 2014. Bubble dynamics in a 3-D gas-solid fluidized bed using ultrafast electron beam X-ray tomography and two?fluid model. AIChE Journal 60, (5): 1632-1644. http://dx.doi.org/10.1002/aic.14393.

22.

Wei Xu, David S. DeCroix, Xin Sun, Mechanistic based DEM simulation of particle attrition in a jet cup, Powder Technology, Volume 253, February 2014, Pages 385-392. http://dx.doi.org/10.1016/j.powtec.2013.11.031 .

23.

Verissimo, G.; Pinho, J.; Leiroz, A.; Cruz, M. E. “A numerical study on bed temperature and gasifying agent effects on the sugarcane bagasse gasification process”, Proceedings of the 15th International Heat Transfer Conference, Kyoto, Japan, August 10 – August 15, 2014. Doi: 10.1615/IHTC15.rne.009817

24.

Fouda, Yahia M., Experimental and computational study of multiphase flow in dry powder inhalers [Doctoral Dissertation], Loughborough University: https://dspace.lboro.ac.uk/dspace-jspui/handle/2134/16557

25.

Xue Q., Fox R. O. Multi-fluid CFD modeling of biomass gasification in polydisperse fluidized-bed gasifiers. Powder Technology, Vol. 254, pp.187-198, 2014. http://dx.doi.org/10.1016/j.powtec.2014.01.025

Publication Year 2013

1.

Zhao Yunhua, Lu Bing, Zhong Yingjie. Euler-Euler modeling of a gas-solid bubbling fluidized bed with kinetic theory of rough particles. Chemical Engineering Science. 2013 12/18/;104(0):767-79. http://dx.doi.org/10.1016/j.ces.2013.10.001.

2.

Yang Shiliang, Luo Kun, Fang Mingming, Zhang Ke, Fan Jianren. Three-Dimensional Modeling of Gas-Solid Motion in a Slot-Rectangular Spouted Bed with the Parallel Framework of the Computational Fluid Dynamics-Discrete Element Method Coupling Approach. Industrial & Engineering Chemistry Research. 2013 Sep 11;52(36):13222-31. http://dx.doi.org/10.1021/ie401811y.

3.

Yan Xiaokang, Holloway William, Sundaresan Sankaran. Periodic flow structures in vertical gas-particle flows. Powder Technology. 2013 Jun;241:174-80. http://dx.doi.org/10.1016/j.powtec.2013.03.024.

4.

Xiong Q. G., Kong S. C., Passalacqua A. Development of a generalized numerical framework for simulating biomass fast pyrolysis in fluidized-bed reactors. Chemical Engineering Science. 2013 Aug;99:305-13. http://dx.doi.org/ 10.1016/j.ces.2013.06.017.

5.

Wang Limin, Zhang Bo, Wang Xiaowei, Ge Wei, Li Jinghai. Lattice Boltzmann based discrete simulation for gas-solid fluidization. Chemical Engineering Science. 2013 Sep 20;101:228-39. http://dx.doi.org/10.1016/j.ces.2013.06.019.

6.

Song Jinghui, Wang Tao, Gao Jing, Xiao Xianbin, Dong Changqing, Hu Xiaoying. Erosion in the rectangular biomass circulating fluidized bed. In: Li Y. G., Li Y., Pan W. G., editors. Progress in Renewable and Sustainable Energy, Pts 1 and 2; 2013. p. 214-9. http://dx.doi.org/10.4028/www.scientific.net/AMR.608-609.214.

7.

Sarkar A., Sun X., Sundaresan S. Sub-grid drag models for horizontal cylinder arrays immersed in gas-particle multiphase flows. Chemical Engineering Science. 2013 Dec;104:399-412. http://dx.doi.org/10.1016/j.ces.2013.08.050.

8.

Passalacqua A., Fox R. O. Simulation of Mono- and Bidisperse Gas-Particle Flow in a Riser with a Third-Order Quadrature-Based Moment Method. Industrial & Engineering Chemistry Research. 2013 Jan;52(1):187-98. http://dx.doi.org/10.1021/ie300424m.

9.

Oyama T., Agblevor F. , Battaglia F., Klein M. Technical Report on Novel Fast Pyrolysis/Catalytic Technology for the Production of Stable Upgraded Liquids. 2013. Tech Virginia. p. 60.

10.

Oger Luc, Savage Stuart B. Airslide flows. Part 2-Flow modeling and comparison with experiments. Chemical Engineering Science. 2013 Mar 22;91:22-34. http://dx.doi.org/10.1016/j.ces.2012.12.042.

11.

Navarro Helio A., de Souza Braun Meire P. Determination of the normal spring stiffness coefficient in the linear spring-dashpot contact model of discrete element method. Powder Technology. 2013 Sep;246:707-22. http://dx.doi.org/10.1016/j.powtec.2013.05.049.

12.

Milioli C. C., Milioli F. E., Holloway W., Agrawal K., Sundaresan S. Filtered Two-Fluid Models of Fluidized Gas-Particle Flows: New Constitutive Relations. Aiche Journal. 2013;59(9):10. http://dx.doi.org/10.1002/aic.14130.

13.

Li T. W., Zhang Y. M. A new model for two-dimensional numerical simulation of pseudo-2D gas-solids fluidized beds. Chemical Engineering Science. 2013 Oct;102:246-56. http://dx.doi.org/10.1016/j.ces.2013.08.019.

14.

Li Tingwen, Chaudhari Kiran, VanEssendelft Dirk, et al. Computational Fluid Dynamic Simulations of a Pilot-Scale Transport Coal Gasifier: Evaluation of Reaction Kinetics. Energy & Fuels. 2013 Dec;27(12):7896-904. http://dx.doi.org/10.1021/ef401887r.

15.

Li Tingwen, Benyahia Sofiane. Evaluation of Wall Boundary Condition Parameters for Gas-Solids Fluidized Bed Simulations. Aiche Journal. 2013 Oct;59(10):3624-32. http://dx.doi.org/10.1002/aic.14132.

16.

Hernandez-Jimenez F., Sanchez-Prieto J., Soria-Verdugo A., Acosta-Iborra A. Experimental quantification of the particle-wall frictional forces in pseudo-2D gas fluidised beds. Chemical Engineering Science. 2013 10/11/;102(0):257-67. http://dx.doi.org/10.1016/j.ces.2013.08.020.

17.

Hernandez-Jimenez F., Gomez-Garcia A., Santana D., Acosta-Iborra A. Gas interchange between bubble and emulsion phases in a 2D fluidized bed as revealed by two-fluid model simulations. Chemical Engineering Journal. 2013 Jan;215:479-90. http://dx.doi.org/10.1016/j.cej.2012.10.056.

18.

Guenther C., Garg R. Technical Report on NETL’s Non Newtonian Multiphase Slurry Workshop: A path forward to understanding non-Newtonian multiphase slurry flows. 2013. National Energy Technology Laboratory (NETL) Pittsburgh, PA, and Morgantown, WV, USA: NETL-PUB-926. p. 81. http://dx.doi.org/10.2172/1121879.

19.

Gopalakrishnan Pradeep, Tafti Danesh. Development of parallel DEM for the open source code MFIX. Powder Technology. 2013 Feb;235:33-41. http://dx.doi.org/10.1016/j.powtec.2012.09.006.

20.

Glascoe L., Antoun T., Kanarska Y., et al. Technical Report on Evolution of an interfacial crack on the concrete-embankment boundary. 2013. Lawrence Livermore National Laboratory (LLNL) Livermore, CA, USA: LLNL-TR-645956. p. 121. http://dx.doi.org/10.2172/1119958.

21.

Gel A., Garg R., Tong C., Shahnam M., Guenther C. Applying uncertainty quantification to multiphase flow computational fluid dynamics. Powder Technology. 2013 Jul;242:27-39. http://dx.doi.org/10.1016/j.powtec.2013.01.045.

22.

Estep Joe, Dufek Josef. Discrete element simulations of bed force anomalies due to force chains in dense granular flows. Journal of Volcanology and Geothermal Research. 2013 3/15/;254(0):108-17. http://dx.doi.org/10.1016/j.jvolgeores.2012.12.023.

23.

Choudhuri A. Tehnical Report on Investigation of Gas Solid Fluidized Bed Dynamics with Non-Spherical Particles. 2013. National Energy Technology Laboratory (NETL) Morgantown, WV, USA, University Of Texas El Paso, Texas, USA. p. 106. http://dx.doi.org/10.2172/1121749.

24.

Bai Wei, Keller Norman K. G., Heindel Theodore J., Fox Rodney O. Numerical study of mixing and segregation in a biomass fluidized bed. Powder Technology. 2013 3//;237(0):355-66. http://dx.doi.org/10.1016/j.powtec.2012.12.018.

25.

Agrawal K., Holloway W., Milioli C. C., Milioli F. E., Sundaresan S. Filtered models for scalar transport in gas-particle flows. Chemical Engineering Science. 2013 May;95:291-300. http://dx.doi.org/10.1016/j.ces.2013.03.017.

Publication Year 2012

1.

Xue Q., Dalluge D., Heindel T. J., Fox R. O., Brown R. C. Experimental validation and CFD modeling study of biomass fast pyrolysis in fluidized-bed reactors. Fuel. 2012 7//;97(0):757-69. http://dx.doi.org/10.1016/j.fuel.2012.02.065.

2.

Tan Qinliang, Liu Tian, Jiang Dalong, Hu Xiaoying, Dong Changqing. Numerical simulation of dual-support leg fluidized bed. In: Pan W., Ren J. X., Li Y. G., editors. Renewable and Sustainable Energy, Pts 1-7; 2012. p. 627-30. http://dx.doi.org/10.4028/www.scientific.net/AMR.347-353.627.

3.

Song Jinghui, Wang Tao, Hu Xiaoying, Dong Changqing. Erosion mechanism of platen heating surfaces in CFB. In: Chen W. Z., Xu X. P., Dai P. Q., Chen Y. L., editors. Advanced Manufacturing Technology, Pts 1-4; 2012. p. 2287-91. http://dx.doi.org/10.4028/www.scientific.net/AMR.472-475.2287.

4.

Rokkam R. Computational fluid dynamic modeling of fluidized-bed polymerization reactors [Doctoral Dissertation]: Iowa State University, Ames, Iowa; 2012. p. 132.

5.

Razavi Behzad Saeedi, Hosseini Seyyed Hossein. Computational Fluid Dynamics Studies of Hydrodynamic Parameters in a Two-Dimensional Conical Spouted Bed. Asian Journal of Chemistry. 2012 Aug;24(8):3571-8.

6.

Murray J. A., Benyahia S., Metzger P., Hrenya C. M. Continuum representation of a continuous size distribution of particles engaged in rapid granular flow. Physics Of Fluids. 2012;24:19. http://dx.doi.org/10.1063/1.4744987.

7.

Murgia S., Vascellari M., Cau G. Comprehensive CFD model of an air-blown coal-fired updraft gasifier. Fuel. 2012 11//;101(0):129-38. http://dx.doi.org/10.1016/j.fuel.2011.08.065.

8.

Murgia S., Cau G., Mura G. Experimental investigation and CFD numerical simulation of WGSR for hydrogen enrichment of high CO2 content syngas from an air-blown updraft coal gasifier. Fuel. 2012 11//;101(0):139-47. http://dx.doi.org/10.1016/j.fuel.2011.10.014.

9.

Miller D. C., Syamlal M., Cottrell R., et al. Annual Report: Carbon Capture Simulation Initiative (CCSI) (30 September 2012). 2012. (NETL) National Energy Technology Laboratory: NETL-PUB-820. p. 39. http://dx.doi.org/10.2172/1098237.

10.

Li Yongchao, Che Defu, Liu Yinhe. CFD simulation of hydrodynamic characteristics in a multiple-spouted bed. Chemical Engineering Science. 2012 10/1/;80(0):365-79. http://dx.doi.org/10.1016/j.ces.2012.06.003.

11.

Li T. W., Guenther C. A CFD study of gas-solid jet in a CFB riser flow. Aiche Journal. 2012 Mar;58(3):756-69. http://dx.doi.org/ 10.1002/aic.12619.

12.

Li Tingwen, Guenther Chris. MFIX-DEM simulations of change of volumetric flow in fluidized beds due to chemical reactions. Powder Technology. 2012 Apr;220:70-8. http://dx.doi.org/10.1016/j.powtec.2011.09.025.

13.

Li Tingwen, Gopalakrishnan Pradeep, Garg Rahul, Shahnam Mehrdad. CFD-DEM study of effect of bed thickness for bubbling fluidized beds. Particuology. 2012 10//;10(5):532-41. http://dx.doi.org/10.1016/j.partic.2012.02.006.

14.

Li Tingwen, Garg Rahul, Galvin Janine, Pannala Sreekanth. Open-source MFIX-DEM software for gas-solids flows: Part II – Validation studies. Powder Technology. 2012 Apr;220:138-50. http://dx.doi.org/10.1016/j.powtec.2011.09.020.

15.

Li Tingwen, Dietiker Jean-Francois, Shahnam Mehrdad. MFIX simulation of NETL/PSRI challenge problem of circulating fluidized bed. Chemical Engineering Science. 2012 Dec 24;84:746-60. http://dx.doi.org/10.1016/j.ces.2012.09.024.

16.

Li F., Song F., Benyahia S., Wang W., Li J. MP-PIC simulation of CFB riser with EMMS-based drag model. Chemical Engineering Science. 2012 Sep 12;82:104-13. http://dx.doi.org/10.1016/j.ces.2012.07.020.

17.

Kumar Apurv, Hodgson Peter, Fabijanic Daniel, Gao Weimin. Numerical solution of gas-solid flow in fluidised bed at sub-atmospheric pressures. Advanced Powder Technology. 2012 Jul;23(4):485-92. http://dx.doi.org/10.1016/j.apt.2012.04.010.

18.

Jalalinejad Farzaneh, Bi Xiaotao T., Grace John R. Effect of electrostatic charges on single bubble in gas-solid fluidized beds. International Journal of Multiphase Flow. 2012 Sep;44:15-28. http://dx.doi.org/10.1016/j.ijmultiphaseflow.2012.03.008.

19.

Igci Yesim, Pannala Sreekanth, Benyahia Sofiane, Sundaresan Sankaran. Validation Studies on Filtered Model Equations for Gas-Particle Flows in Risers. Industrial & Engineering Chemistry Research. 2012 Feb 1;51(4):2094-103. http://dx.doi.org/10.1021/ie2007278.

20.

Hu Xiaoying, Wang Tao, Song Jinghui, Dong Changqing, Ieee. Research on wear mechanism of dense phase area in fluidized bed. 2012 Asia-Pacific Power and Energy Engineering Conference; 2012.

21.

Holloway William, Sundaresan Sankaran. Filtered models for reacting gas-particle flows. Chemical Engineering Science. 2012 Sep 12;82:132-43. http://dx.doi.org/10.1016/j.ces.2012.07.019.

22.

Holloway W., Sun J., Sundaresan S. Effect of microstructural anisotropy on the fluid-particle drag force and the stability of the uniformly fluidized state. Journal of Fluid Mechanics. 2012 Dec 25;713:27-49. http://dx.doi.org/10.1017/jfm.2012.425.

23.

Herzog Nicoleta, Schreiber Matthias, Egbers Christoph, Krautz Hans Joachim. A comparative study of different CFD-codes for numerical simulation of gas-solid fluidized bed hydrodynamics. Computers & Chemical Engineering. 2012 Apr 6;39:41-6. http://dx.doi.org/10.1016/j.compchemeng.2011.12.002.

24.

Gaspar Branco da Silva Fernanda Ribeiro, de Souza Marcos, de Souza da Costa Alexandre Marconi, de Matos Jorge Luiz Mario, Paraiso Paulo Roberto. Experimental and numerical analysis of soybean meal drying in fluidized bed. Powder Technology. 2012 Oct;229:61-70. http://dx.doi.org/10.1016/j.powtec.2012.06.008.

25.

Garg Rahul, Galvin Janine, Li Tingwen, Pannala Sreekanth. Open-source MFIX-DEM software for gas-solids flows: Part I-Verification studies. Powder Technology. 2012 Apr;220:122-37. http://dx.doi.org/10.1016/j.powtec.2011.09.019.

26.

Feng Z.-G. Final Technical Report on Use of an Accurate DNS Particulate Flow Method to Supply and Validate Boundary Conditions for the MFIX Code. 2012. National Energy Technology Laboratory (NETL) Morgantown, WV, USA, Antonio University Of Texas At San. p. 26. http://dx.doi.org/10.2172/1055214.

27.

Dutta A., Constales D., Heynderickx G. J. Applying the direct quadrature method of moments to improve multiphase FCC riser reactor simulation. Chemical Engineering Science. 2012 Dec;83:93-109. http://dx.doi.org/ 10.1016/j.ces.2012.04.036.

28.

Dietiker Jean-Francois, Li Tingwen, Garg Rahul, Shahnam Mehrdad. Cartesian grid simulations of gas-solids flow systems with complex geometry. Powder Technology. 2013 Feb;235:696-705. http://dx.doi.org/10.1016/j.powtec.2012.11.028.

29.

Di Carlo Andrea, Foscolo Pier Ugo. Hot syngas filtration in the freeboard of a fluidized bed gasifier: Development of a CFD model. Powder Technology. 2012 May;222:117-30. http://dx.doi.org/10.1016/j.powtec.2012.02.019.

30.

de Souza Braun Meire Pereira, Palma Geraldo Luiz, Navarro Helio Aparecido, Varoto Paulo Sergio, Asme. DETERMINATION OF MINIMUM FLUIDIZATION VELOCITY FOR GAS-SOLID BEDS BY EXPERIMENTAL DATA AND NUMERICAL SIMULATIONS; 2012.

31.

da Silva Fernanda Ribeiro Gaspar Branco, de Souza Marcos, da Costa Alexandre Marconi de Souza, Jorge Luiz Mario de Matos, Paraiso Paulo Roberto. Experimental and numerical analysis of soybean meal drying in fluidized bed. Powder Technology. 2012 10//;229(0):61-70. http://dx.doi.org/10.1016/j.powtec.2012.06.008.

32.

Cordiner S., De Simone G., Mulone V. Experimental-numerical design of a biomass bubbling fluidized bed gasifier for paper sludge energy recovery. Applied Energy. 2012 9//;97(0):532-42. http://dx.doi.org/10.1016/j.apenergy.2011.11.024.

33.

Brenner Thomas A., Fontenot Raymond L., Cizmas Paul G. A., O’Brien Thomas J., Breault Ronald W. A reduced-order model for heat transfer in multiphase flow and practical aspects of the proper orthogonal decomposition. Computers & Chemical Engineering. 2012 8/10/;43(0):68-80. http://dx.doi.org/10.1016/j.compchemeng.2012.04.003.

34.

Benyahia Sofiane, Sundaresan Sankaran. Do we need sub-grid scale corrections for both continuum and discrete gas-particle flow models? Powder Technology. 2012 Apr;220:2-6. http://dx.doi.org/10.1016/j.powtec.2011.10.052.

35.

Benyahia Sofiane. Analysis of Model Parameters Affecting the Pressure Profile in a Circulating Fluidized Bed. Aiche Journal. 2012 Feb;58(2):427-39. http://dx.doi.org/10.1002/aic.12603.

36.

Benyahia Sofiane. Fine-grid simulations of gas-solids flow in a circulating fluidized bed. Aiche Journal. 2012 Nov;58(11):3589-92. http://dx.doi.org/10.1002/aic.13826.

37.

Azizi Salar, Mowla Dariush, Ahmadi Goodarz. Numerical evaluation of turbulence models for dense to dilute gas-solid flows in vertical conveyor. Particuology. 2012 10//;10(5):553-61. http://dx.doi.org/10.1016/j.partic.2011.12.006.

38.

Molina, I., Burgisser, A., and Oppenheimer, C. (2012) Numerical simulations of  convection in crystal-bearing magmas: A case study of the magmatic system at Erebus, Antarctica, Journal of Geophysical Research, v.117, B07209. http://dx.doi.org/10.1029/2011JB008760

Publication Year 2011

1.

Xue Q., Heindel T. J., Fox R. A CFD model for biomass fast pyrolysis in fluidized-bed reactors. Chemical Engineering Science. 2011 Jun;66(11):2440-52. http://dx.doi.org/10.1016/j.ces.2011.03.010.

2.

Sundaresan S., Tardos G. I., Subramaniam S. Final Technical Report on Rheological Behavior of Dense Assemblies of Granular Materials. 2011. Princeton University Princeton, NJ, USA. p. 297. http://dx.doi.org/10.2172/1026503.

3.

Sun X., Rink N. Final Technical Report on Development of a Hydrogasification Process for Co-Production of Substitute Natural Gas (SNG) and Electric Power from Western Coals. 2011. (NETL) National Energy Technology Laboratory, Company Arizona Public Service. p. 1207. http://dx.doi.org/10.2172/1121246.

4.

Reuge Nicolas, Caussat Brigitte. Modeling of Silicon CVD into Agglomerates of Sub-micrometer-size Particles in a Fluidized Bed. Chemical Vapor Deposition. 2011 Dec;17(10-12):305-11. http://dx.doi.org/10.1002/cvde.201106888.

5.

Passalacqua A., Fox R. O. Advanced continuum modelling of gas-particle flows beyond the hydrodynamic limit. Applied Mathematical Modelling. 2011 Apr;35(4):1616-27. http://dx.doi.org/10.1016/j.apm.2010.09.038.

6.

Passalacqua A., Fox R. O. Implementation of an iterative solution procedure for multi-fluid gas-particle flow models on unstructured grids. Powder Technology. 2011 Nov 10;213(1-3):174-87. http://dx.doi.org/10.1016/j.powtec.2011.07.030.

7.

Musser J. M. H. Modeling of heat transfer and reactive chemistry for particles in gas-solid flow utilizing continuum-discrete methodology (CDM) [Doctoral Dissertation]: West Virginia University, Morgantown, WV, USA; 2011. p. 313.

8.

Moraveji Mostafa Keshavarz, Sokout Fatemeh Sadat, Rashidi Alimorad. CFD modeling and experimental study of multi-walled carbon nanotubes production by fluidized bed catalytic chemical vapor deposition. International Communications in Heat and Mass Transfer. 2011 8//;38(7):984-9. http://dx.doi.org/10.1016/j.icheatmasstransfer.2011.03.029.

9.

Li Tingwen, Dietiker Jean-Francois, Zhang Yongmin, Shahnam Mehrdad. Cartesian grid simulations of bubbling fluidized beds with a horizontal tube bundle. Chemical Engineering Science. 2011 Dec 1;66(23):6220-31. http://dx.doi.org/10.1016/j.ces.2011.08.056.

10.

Li T. High-Resolution Simulations of Gas-Solids Jet Penetration Into a High Density Riser Flow. In: Knowlton T., editor. 10th International Conference on Circulating Fluidized Beds and Fluidization Technology – CFB – 10; 2011; Sun River, OR, USA: ECI Digital Archives; 2011.

11.

Kim Yong Nam, Wu Changning, Cheng Yi. CFD simulation of hydrodynamics of gas-solid multiphase flow in downer reactors: revisited. Chemical Engineering Science. 2011 11/1/;66(21):5357-65. http://dx.doi.org/10.1016/j.ces.2011.07.036.

12.

Igci Yesim, Sundaresan Sankaran. Verification of Filtered Two-Fluid Models for Gas-Particle Flows in Risers. Aiche Journal. 2011 Oct;57(10):2691-707. http://dx.doi.org/10.1002/aic.12486.

13.

Igci Yesim, Sundaresan Sankaran. Constitutive Models for Filtered Two-Fluid Models of Fluidized Gas-Particle Flows. Industrial & Engineering Chemistry Research. 2011 Dec 7;50(23):13190-201. http://dx.doi.org/ 10.1021/ie200190q.

14.

Hrenya C. M., Cocco R., Fox R., Subramaniam S., Sundaresan S. Final Technical Report on Development, Verification, and Validation of Multiphase Models for Polydisperse Flows. 2011. (NETL) National Energy Technology Laboratory, Colorado University Of. p. 559. http://dx.doi.org/10.2172/1039998.

15.

Holloway William, Benyahia Sofiane, Hrenya Christine M., Sundaresan Sankaran. Meso-scale structures of bidisperse mixtures of particles fluidized by a gas. Chemical Engineering Science. 2011 Oct 1;66(19):4403-20. http://dx.doi.org/10.1016/j.ces.2011.05.037.

16.

Heske C., Moujaes S., Weimer A., et al. Technical Report on High Efficiency Generation of Hydrogen Fuels Using Solar Thermochemical Splitting of Water. 2011. UNLV Research Foundation Las Vegas, Nevada, USA: DOE/GO/13062/Final. p. 400. http://dx.doi.org/10.2172/1025597.

17.

Hernandez-Jimenez F., Third J. R., Acosta-Iborra A., Muller C. R. Comparison of bubble eruption models with two-fluid simulations in a 2D gas-fluidized bed. Chemical Engineering Journal. 2011 Jun;171(1):328-39. http://dx.doi.org/10.1016/j.cej.2011.04.013.

18.

Farzaneh Meisam, Sasic Srdjan, Almstedt Alf-Erik, Johnsson Filip, Pallares David. A novel multigrid technique for Lagrangian modeling of fuel mixing in fluidized beds. Chemical Engineering Science. 2011 11/15/;66(22):5628-37. http://dx.doi.org/10.1016/j.ces.2011.07.060.

19.

Darabi Pirooz, Pougatch Konstantin, Salcudean Martha, Grecov Dana. DEM investigations of fluidized beds in the presence of liquid coating. Powder Technology. 2011 Dec 25;214(3):365-74. http://dx.doi.org/10.1016/j.powtec.2011.08.032.

20.

Ceccio S., Curtis J. Final Technical Report on A Study of Vertical Gas Jets in a Bubbling Fluidized Bed. 2011. (NETL) National Energy Technology Laboratory, Michigan Regents Of The University Of. http://dx.doi.org/10.2172/1064409
.

21.

Bogere M. Final Technical Report on Dense Multiphase Flow Simulation: Continuum Model for Poly-Dispersed Systems Using Kinetic Theory. 2011. (NETL) National Energy Technology Laboratory. p. 25. http://dx.doi.org/10.2172/1060497
.

22.

Baker A. E., Bland A. S. B., Hack J. J., et al. Technical Report on High Performance Computing Facility Operational Assessment, FY 2011 Oak Ridge Leadership Computing Facility. 2011. (ORNL) Oak Ridge National Laboratory, Sciences Center for Computational: ORNL/TM-2011/314. p. 130. http://dx.doi.org/10.2172/1023867
.

Publication Year 2010

1.

Wu Xuezhi, Jiang Fan, Xu Xiang, Xiao Yunhan. CFD simulation of smooth and T-abrupt exits in circulating fluidized bed risers. Particuology. 2010 8//;8(4):343-50. http://dx.doi.org/10.1016/j.partic.2010.01.007
.

2.

Wang X. Y., Liao L. L., Fan B. G., et al. Experimental validation of the gas-solid flow in the CFB riser. Fuel Processing Technology. 2010 Aug;91(8):927-33. http://dx.doi.org/10.1016/j.fuproc.2010.02.020
.

3.

Sundaresan S. Final Technical Report on Closures for Course-Grid Simulation of Fluidized Gas-Particle Flows. 2010. Princeton University Princeton, NJ, USA. p. 261. http://dx.doi.org/10.2172/1007990
.

4.

Pu Wenhao, Zhao Changsui, Xiong Yuanquan, et al. Numerical simulation on dense phase pneumatic conveying of pulverized coal in horizontal pipe at high pressure. Chemical Engineering Science. 2010 Apr 15;65(8):2500-12. http://dx.doi.org/10.1016/j.ces.2009.12.025
.

5.

Passalacqua A., Fox R. O., Garg R., Subramaniam S. A fully coupled quadrature-based moment method for dilute to moderately dilute fluid-particle flows. Chemical Engineering Science. 2010 Apr;65(7):2267-83. http://dx.doi.org/10.1016/j.ces.2009.09.002
.

6.

Liu Daoyin, Chen Xiaoping. Lateral solids dispersion coefficient in large-scale fluidized beds. Combustion and Flame. 2010 11//;157(11):2116-24. http://dx.doi.org/10.1016/j.combustflame.2010.04.020
.

7.

Li T. W., Mahecha-Botero A., Grace J. R. Computational Fluid Dynamic Investigation of Change of Volumetric Flow in Fluidized-Bed Reactors. Industrial & Engineering Chemistry Research. 2010 Aug;49(15):6780-9. http://dx.doi.org/10.1021/ie901676d
.

8.

Li T. W., Grace J., Bi X. T. Study of wall boundary condition in numerical simulations of bubbling fluidized beds. Powder Technology. 2010 Nov;203(3):447-57. http://dx.doi.org/10.1016/j.powtec.2010.06.005
.

9.

Li Tingwen, Gel Aytekin, Syamlal Madhava, Guenther Chris, Pannala Sreekanth. High-Resolution Simulations of Coal Injection in A Gasifier. Industrial & Engineering Chemistry Research. 2010 Nov 3;49(21):10767-79. http://dx.doi.org/10.1021/ie100519s
.

10.

Kim Kibum, Moujaes Samir F., Kolb Gregory J. Experimental and simulation study on wind affecting particle flow in a solar receiver. Solar Energy. 2010 Feb;84(2):263-70. http://dx.doi.org/10.1016/j.solener.2009.11.005.

11.

Kashyap Mayank, Gidaspow Dimitri. Computation and measurements of mass transfer and dispersion coefficients in fluidized beds. Powder Technology. 2010 10/25/;203(1):40-56. http://dx.doi.org/10.1016/j.powtec.2010.03.025.

12.

Hosseini Seyyed Hossein, Ahmadi Goodarz, Rahimi Rahbar, Zivdar Mortaza, Esfahany Mohsen Nasr. CFD studies of solids hold-up distribution and circulation patterns in gas-solid fluidized beds. Powder Technology. 2010 6/28/;200(3):202-15. http://dx.doi.org/10.1016/j.powtec.2010.02.024
.

13.

Holloway William, Yin Xiaolong, Sundaresan Sankaran. Fluid-Particle Drag in Inertial Polydisperse Gas-Solid Suspensions. Aiche Journal. 2010 Aug;56(8):1995-2004. http://dx.doi.org/10.1002/aic.12127
.

14.

Gerber S., Behrendt F., Overmann M. An Eulerian modeling approach of wood gasification in a bubbling fluidized bed reactor using char as bed material. Fuel. 2010 Oct;89(10):2903-17. http://dx.doi.org/10.1016/j.fuel.2010.03.034
.

15.

Filtvedt W. O., Javidi M., Holt A., et al. Development of fluidized bed reactors for silicon production. Solar Energy Materials and Solar Cells. 2010 12//;94(12):1980-95. http://dx.doi.org/10.1016/j.solmat.2010.07.027
.

16.

de Souza Braun Meire Pereira, Mineto Andreza Tangerino, Navarro Helio Aparecido, Cabezas-Gomez Luben, da Silva Renato Cesar. The effect of numerical diffusion and the influence of computational grid over gas-solid two-phase flow in a bubbling fluidized bed. Mathematical and Computer Modelling. 2010 Nov;52(9-10):1390-402. http://dx.doi.org/10.1016/j.mcm.2010.05.017
.

17.

Brenner Thomas A., Fontenot Raymond L., Cizmas Paul G. A., O’Brien Thomas J., Breault Ronald W. Augmented proper orthogonal decomposition for problems with moving discontinuities. Powder Technology. 2010 10/25/;203(1):78-85. http://dx.doi.org/10.1016/j.powtec.2010.03.032
.

18.

Breault Ronald W., Guenther Chris. Mass transfer coefficient prediction method for CFD modeling of riser reactors. Powder Technology. 2010 Oct 25;203(1):33-9. http://dx.doi.org/10.1016/j.powtec.2010.03.024
.

19.

Benyahia Sofiane, Galvin Janine E. Estimation of Numerical Errors Related to Some Basic Assumptions in Discrete Particle Methods. Industrial & Engineering Chemistry Research. 2010 Nov 3;49(21):10588-605. http://dx.doi.org/10.1021/ie100662z.

20.

Benyahia Sofiane. On the Effect of Subgrid Drag Closures. Industrial & Engineering Chemistry Research. 2010 Jun 2;49(11):5122-31. http://dx.doi.org/10.1021/ie900658k
.

Publication Year 2009

1.

Syamlal M., Guenther C., Gel A., Pannala S. Advanced coal gasifier designs using large-scale simulations. In: Simon H., editor. Scidac 2009: Scientific Discovery through Advanced Computing; 2009.

2.

Reuge N., Cadoret L., Caussat B. Multifluid Eulerian modelling of a silicon Fluidized Bed Chemical Vapor Deposition process: Analysis of various kinetic models. Chemical Engineering Journal. 2009 May 15;148(2-3):506-16. http://dx.doi.org/10.1016/j.cej.2008.12.017.

3.

Passalacqua A., Marmo L. A critical comparison of frictional stress models applied to the simulation of bubbling fluidized beds. Chemical Engineering Science. 2009 Jun 15;64(12):2795-806. http://dx.doi.org/10.1016/j.ces.2009.03.005.

4.

Pannala Sreekanth, Daw C. Stuart, Finney Charles E. A., Benyahia Sofiane, Syamlal Madhava, O’Brien Thomas J. Modeling the Collisional-Plastic Stress Transition for Bin Discharge of Granular Material. In: Nakagawa M., Luding S., editors. Powders and Grains 2009; 2009. p. 657-60. http://dx.doi.org/10.1063/1.3180012.

5.

Li T. W., Pougatch K., Salcudean M., Grecov D. Mixing of secondary gas injection in a bubbling fluidized bed. Chemical Engineering Research & Design. 2009 Nov;87(11A):1451-65. http://dx.doi.org/10.1016/j.cherd.2009.04.012.

6.

Li T. W., Pougatch K., Salcudean M., Grecov D. Numerical simulation of single and multiple gas jets in bubbling fluidized beds. Chemical Engineering Science. 2009 Dec;64(23):4884-98. http://dx.doi.org/10.1016/j.ces.2009.07.024.

7.

Kim Kibum, Siegel Nathan, Kolb Greg, Rangaswamy Vijayarangan, Moujaes Samir F. A study of solid particle flow characterization in solar particle receiver. Solar Energy. 2009 10//;83(10):1784-93. http://dx.doi.org/10.1016/j.solener.2009.06.011.

8.

Hosseini S. H., Zivdar M., Rahimi R. CFD simulation of gas-solid flow in a spouted bed with a non-porous draft tube. Chemical Engineering and Processing: Process Intensification. 2009 11//;48(11-12):1539-48. http://dx.doi.org/10.1016/j.cep.2009.09.004.

9.

Hartge Ernst-Ulrich, Ratschow Lars, Wischnewski Reiner, Werther Joachim. CFD-simulation of a circulating fluidized bed riser. Particuology. 2009 Aug;7(4):283-96. http://dx.doi.org/10.1016/j.partic.2009.04.005.

10.

Gidaspow D., Jiradilok V., Kashyap M., Chalermsinsuwan B. Final Technical Report on Gasificaton Transport: A Multiphase CFD Approach & Measurements. 2009. Technology Illinois Institute Of. p. 82. http://dx.doi.org/10.2172/966356.

11.

Dan Sun, Shuyan Wang, Gougdong Liu, Shuai Wang, Yongjian Liu, Lixin Wei. Simulations of flow behavior of gas and particles in a spouted bed using a second-order moment method-frictional stresses model. Chemical Engineering Science. 2010 5/1/;65(9):2635-48. http://dx.doi.org/10.1016/j.ces.2009.12.042.

12.

Cadoret L., Reuge N., Pannala S., et al. Silicon Chemical Vapor Deposition on macro and submicron powders in a fluidized bed. Powder Technology. 2009 Mar 5;190(1-2):185-91. http://dx.doi.org/10.1016/j.powtec.2008.04.083.

Publication Year 2008

1.

Yin Chungen, Rosendahl Lasse A., Kaer Soren K. Grate-firing of biomass for heat and power production. Progress in Energy and Combustion Science. 2008 12//;34(6):725-54. http://dx.doi.org/10.1016/j.pecs.2008.05.002.

2.

Xie Nan, Battaglia Francine, Pannala Sreekanth. Effects of using two- versus three-dimensional computational modeling of fluidized beds: Part II, budget analysis. Powder Technology. 2008 2/15/;182(1):14-24. http://dx.doi.org/10.1016/j.powtec.2007.09.014.

3.

Xie Nan, Battaglia Francine, Pannala Sreekanth. Effects of using two- versus three-dimensional computational modeling of fluidized beds: Part I, hydrodynamics. Powder Technology. 2008 2/15/;182(1):1-13. http://dx.doi.org/10.1016/j.powtec.2007.07.005.

4.

Wang Shuyan, Shen Zhiheng, Lu Huilin, Yu Long, Liu Wentie, Ding Yonlong. Numerical predictions of flow behavior and cluster size of particles in riser with particle rotation model and cluster-based approach. Chemical Engineering Science. 2008 Aug 16;63(16):4116-25. http://dx.doi.org/10.1016/j.ces.2008.05.021.

5.

Tsimring L. S. Final Technical Report on Modeling for Process Control: High-Dimensional Systems. 2008. University of California University of California, San Diego, USA: DOE/ER/14138-1; TRN: US201003%%182. p. 5. http://dx.doi.org/10.2172/937090.

6.

Shadle L. J., Ludlow C. J., Spenik J. L., Seachman S. M., Guenther C. P. Jet penetration into a riser operated in dense suspension upflow: experimental and model comparisons. In: Werther J., Nowak W., Wirth K., Hartge E., editors. 9th International Conference on Circulating Fluidized Beds (CFB9); 2008; Hamburg, Germany, May 13 – May 16, 2008: Circulating Fluidized Bed Technology IX; 2008. p. 307-12.

7.

Services Southern Company. Technical Report on Power Systems Development Facility Gasification Test Campaign TC22. 2008. Southern Company Services Incorporation Wilsonville, Al, USA. p. 64. http://dx.doi.org/10.2172/1000470.

8.

Reuge N., Cadoret L., Coufort-Saudejaud C., Pannala S., Syamlal M., Caussat B. Multifluid Eulerian modeling of dense gas-solids fluidized bed hydrodynamics: Influence of the dissipation parameters. Chemical Engineering Science. 2008 Nov 16;63(22):5540-51. http://dx.doi.org/10.1016/j.ces.2008.07.028.

9.

Nemtsov D. A., Zabaniotou A. Mathematical modelling and simulation approaches of agricultural residues air gasification in a bubbling fluidized bed reactor. Chemical Engineering Journal. 2008 9/15/;143(1-3):10-31. http://dx.doi.org/10.1016/j.cej.2008.01.023.

10.

Jung J. W., Gamwo I. K. Multiphase CFD-based models for chemical looping combustion process: Fuel reactor modeling. Powder Technology. 2008 Apr 21;183(3):401-9. http://dx.doi.org/10.1016/j.powtec.2008.01.019.

11.

Igci Yesim, Andrews Arthur T., Sundaresan Sankaran, Pannala Sreekanth, O’Brien Thomas. Filtered two-fluid models for fluidized gas-particle suspensions. Aiche Journal. 2008 Jun;54(6):1431-48. http://dx.doi.org/10.1002/aic.11481.

12.

Cizmas Paul G. A., Richardson Brian R., Brenner Thomas A., O’Brien Thomas J., Breault Ronald W. Acceleration techniques for reduced-order models based on proper orthogonal decomposition. Journal of Computational Physics. 2008 8/10/;227(16):7791-812. http://dx.doi.org/10.1016/j.jcp.2008.04.036.

13.

Bryden K., Hess J. R., Ulrich T., Zemetra R. Final Technical Report: DOE/ID/14215 2008. University Iowa State: DOE/ID/14215; TRN: US200902%%226. p. 45. http://dx.doi.org/10.2172/935984.

14.

Benyahia Sofiane. Verification and validation study of some polydisperse kinetic theories. Chemical Engineering Science. 2008 12/1/;63(23):5672-80. http://dx.doi.org/10.1016/j.ces.2008.08.016.

15.

Benyahia Sofiane. A time-averaged model for gas-solids flow in a one-dimensional vertical channel. Chemical Engineering Science. 2008 May;63(9):2536-47. http://dx.doi.org/10.1016/j.ces.2008.02.012.

16.

Benyahia Sofiane. Validation Study of Two Continuum Granular Frictional Flow Theories. Industrial & Engineering Chemistry Research. 2008 Nov 19;47(22):8926-32. http://dx.doi.org/10.1021/ie8003557.

17.

Battaglia F. Final Technical Report on Detailed Reaction Kinetics for CFD Modeling of Nuclear Fuel Pellet Coating for High Temperature Gas-Cooled Reactors. 2008. University Iowa State: DOE-ID14661-1; TRN: US0900513. p. 11. http://dx.doi.org/10.2172/942124.

18.

Banerjee S., Chen A., Patel R., et al. Final Report on Enhanced Productivity of Chemical Processes Using Dense Fluidized Beds. 2008. Chemicals Millennium Inorganic: TRN: US200809%%686. p. 106. http://dx.doi.org/10.2172/924394.

Publication Year 2007

1.

Xie N. Computational analyses for modeling fluidized bed gasification processes [Doctoral Dissertation]: Iosa State University, Ames, Iowa, USA; 2007. p. 174.

2.

Whitty K. Final Technical Report on Investigation of Fuel Chemistry and Bed Performance in a Fluidized Bed Black Liquor Steam Reformer. 2007. University Of Utah Salt Lake City, UT, USA. p. 179. http://dx.doi.org/10.2172/926666.

3.

Weber Michael W., Hrenya Christine M. Computational study of pressure-drop hysteresis in fluidized beds. Powder Technology. 2007 8/25/;177(3):170-84. http://dx.doi.org/10.1016/j.powtec.2007.01.016.

4.

Sun Jin, Battaglia Francine, Subramaniam Shankar. Hybrid two-fluid DEM simulation of gas-solid fluidized beds. Journal of Fluids Engineering-Transactions of the Asme. 2007 Nov;129(11):1394-403. http://dx.doi.org/10.1115/1.2786530.

5.

Sun J. Mutiscale Modeling of Segregation in Granular Flows [Doctoral Dissertation]: Iowa State University, Ames, Iowa; 2007. p. 170.

6.

Pannala Sreekanth, Daw C. Stuart, Finney Charles E. A., Boyalakuntla Dhanunjay, Syamlal Madhava, O’Brien Thomas J. Simulating the dynamics of spouted-bed nuclear fuel coaters. Chemical Vapor Deposition. 2007 Sep;13(9):481-90. http://dx.doi.org/10.1002/cvde.200606562.

7.

Malony A. D. Technical Report on Performance Engineering Technology for Scientific Component Software. 2007. University of Oregon Eugene, OR: DOE/ER25561-Final; TRN: US200816%%658. p. 12. http://dx.doi.org/10.2172/909872.

8.

Gel A., Pannala S., Syamlal M., O’Brien T. J., Gel E. S. Comparison of frameworks for a next-generation multiphase flow solver, MFIX: a group decision-making exercise. Concurrency and Computation-Practice & Experience. 2007 Apr 10;19(5):609-24. http://dx.doi.org/10.1002/cpe.1085.

9.

Galvin J. E. On The Hydrodynamic Description of Binary Mixtures of Rapid Granular Flows and Gas-Fluidized Beds [Doctoral Dissertation]: University of Colorado, Boulder, CO, USA; 2007. p. 523.

10.

Fan R., Fox R. O. Segregation in polydisperse fluidized beds: Validation of a multi-fluid model. Chemical Engineering Science. 2008 Jan;63(1):272-85. http://dx.doi.org/10.1016/j.ces.2007.09.038.

11.

El Kawi O. S. Abd, Atwan E. F., Abdelmonem S. A., Abdalla A. M., Elshazly K. M. Hydrodynamic and thermal modelling of gas-particle flow in fluidized beds. International Journal of Chemical Reactor Engineering. 2007 Sep 4;5.

12.

Dartevelle S., Valentine G. A. Transient multiphase processes during the explosive eruption of basalt through a geothermal borehole (Namafjall, Iceland, 1977) and implications for natural volcanic flows. Earth and Planetary Science Letters. 2007 10/30/;262(3-4):363-84. http://dx.doi.org/10.1016/j.epsl.2007.07.053.

13.

Dartevelle S. Technical Report on From model conception to verification and validation, a global approach to multiphase Navier-Stoke models with an emphasis on volcanic explosive phenomenology. 2007. Los Alamos National Laboratory (LANL) Los Alamos, NM, USA: LA-14346; TRN: US200909%%265. p. 92. http://dx.doi.org/10.2172/948564.

14.

Cadoret L., Reuge N., Pannala S., Syamlal M., Coufort C., Caussat B. Silicon CVD on powders in fluidized bed: Experimental and multifluid Eulerian modelling study. Surface & Coatings Technology. 2007 Sep 25;201(22-23):8919-23. http://dx.doi.org/10.1016/j.surfcoat.2007.04.119.

15.

Benyahia Sofiane, Syamlal Madhava, O’Brien Thomas J. Study of the ability of multiphase continuum models to predict core-annulus flow. Aiche Journal. 2007 Oct;53(10):2549-68. http://dx.doi.org/10.1002/aic.11276.

Publication Year 2006

1.

Weber Michael W., Hrenya Christine M. Square-well model for cohesion in fluidized beds. Chemical Engineering Science. 2006 Jul;61(14):4511-27. http://dx.doi.org/10.1016/j.ces.2006.02.008.

2.

Sundaresan Sankaran, Andrews Arthur T., Igci Yesim. Coarse-graining of two-fluid models for fluidized gas-particle suspension. Abstracts of Papers of the American Chemical Society. 2006 Mar 26;231.

3.

Sun J., Battaglia F. Hydrodynamic modeling of particle rotation for segregation in bubbling gas-fluidized beds. Chemical Engineering Science. 2006 Mar;61(5):1470-9. http://dx.doi.org/10.1016/j.ces.2005.09.003.

4.

Sousa Jr Ruy, Colmati Flavio, Gonzalez Ernesto Rafael. Modeling techniques applied to the study of gas diffusion electrodes and proton exchange membrane biochemical fuel cells. Journal of Power Sources. 2006 10/20/;161(1):183-90. http://dx.doi.org/10.1016/j.jpowsour.2006.03.094.

5.

Seachman S. M., Yue P. C., Ludlow J. C., Shadle L. J. Solids Fraction Measurement with a Reflective Fiber Optic Probe (569c). AIChE 2006 Annual Meeting; 2006; San Francisco, CA, Nov. 12 – Nov. 17, 2006: AIChE Conference Proceedings; 2006. p. 6.

6.

Pannala S., Daw S. C., Boyalakuntla D. S., Finney C. E. A. Technical Report on Process Modeling Phase I Summary Report for the Advanced Gas Reactor Fuel Development and Qualification Program. 2006. Oak Ridge National Laboratory (ORNL) Oak Ridge, Tennessee, USA: ORNL/TM-2006/520; AF3610200; NEAF260. p. 49. http://dx.doi.org/10.2172/1052234.

7.

Makkawi Y. T., Wright P. C., Ocone R. The effect of friction and inter-particle cohesive forces on the hydrodynamics of gas-solid flow: A comparative analysis of theoretical predictions and experiments. Powder Technology. 2006 Apr 25;163(1-2):69-79. http://dx.doi.org/10.1016/j.powtec.2006.01.020.

8.

Jung J. W., Gidaspow D., Gamwo I. K. Bubble computation, granular temperatures, and reynolds stresses. Chemical Engineering Communications. 2006 Aug;193(8):946-75. http://dx.doi.org/10.1080/00986440500351982.

9.

Holder G., Mathews J., Wilson T., et al. Final Technical Report on University/NETL Student Partnership Program 2006. (NETL) National Energy Technology Laboratory, University Of Pittsburgh Pittsburgh, Pennsylvania, USA. p. 39. http://dx.doi.org/10.2172/928838.

10.

Guenther C. P., Breault R. W. A Detailed Look Inside a Transport Reactor (paper 20-2). 23rd Annual International Pittsburgh Coal Conference; 2006; Pittsburgh, Pennsylvania, USA, Sept. 25 – Sept. 28, 2006: International Pittsburgh Coal Conference, CD-ROM Proceedings; 2006. p. 12.

11.

Fan R. Computational Fluid Dynamics Simulation of Fluidized Bed Polymerization Reactors [Doctoral Dissertation]: Iowa State University, Ames, Iowa; 2006. p. 197.

12.

Das Sharma S., Pugsley T., Delatour R. Three-dimensional CFD model of the deaeration rate of FCC particles. Aiche Journal. 2006 Jul;52(7):2391-400. http://dx.doi.org/10.1002/aic.10858.

13.

Dartevelle S. Technical Report on Geophysical Multiphase Flow With Interphase Exchanges Hydrodynamic and Thermodynamic Models, and Numerical Techniques, Version FMFIX-1.61, Design Document Attachment 1. 2006. Los Alamos National Laboratory (LANL) Los Alamos, NM, USA: MOL.20061005.0023; DC# 48387; TRN: US0700395. p. 63. http://dx.doi.org/10.2172/894813.

14.

Cabezas-Gomez L., Silva R. C., Milioli F. E. Some modeling and numerical aspects of the two-fluid simulation of the gas-solids flow in a CFB riser. Brazilian Journal of Chemical Engineering. 2006 Oct-Dec;23(4):487-96.

Publication Year 2005

1.

Zitney S. E., Guenther C. P. Gasification CFD Modeling for Advanced Power Plant Simulations (paper 20-2). 22nd Annual International Pittsburgh Coal Conference; 2005; Pittsburgh, Pennsylvania, Sept. 12 – Sept. 15, 2005: International Pittsburgh Coal Conference, CD-ROM Proceedings; 2005. p. 12.

2.

Yuan T., Cizmas P. G., O’Brien T. A reduced-order model for a bubbling fluidized bed based on proper orthogonal decomposition. Computers & Chemical Engineering. 2005 12/15/;30(2):243-59. http://dx.doi.org/10.1016/j.compchemeng.2005.09.001.

3.

Whitty K. Annual Technical Report on Investigation of Fuel Chemistry and Bed Performance in a Fluidized Bed Black Liquor Steam Reformer. 2005. University Of Utah Salt Lake City, UT, USA. p. 83. http://dx.doi.org/10.2172/850294.

4.

van der Lee L., Chandrasekaran B., Hulme I., Kantzas A. A non-invasive hydrodynamic study of gas-solid fluidised bed of linear low density polyethylene. Canadian Journal of Chemical Engineering. 2005 Feb;83(1):119-26.

5.

Miller A. L. Final Technical Report on Numerical Modeling of Reactive Multiphase Flow for FCC and Hot Gas Desulfurization Circulating Fluidized Beds. 2005. West Virginia University Research Corporation Morgantown, WV, USA: DOE/ER/45727-1; TRN: US200712%%217. p. 139. http://dx.doi.org/10.2172/877149.

6.

Krier D. Technical Report on Magma Dynamics at Yucca Mountain, Nevada. 2005. Bechtel SAIC Company LCC, Las Vegas, Nevada, USA: ANL-MGR-GS-000005 REV 00; DOC.20050829.0006; DC#44674; TRN: US0504601. p. 114. http://dx.doi.org/10.2172/859089.

7.

Dufek J., Bergantz G. W. Transient two-dimensional dynamics in the upper conduit of a rhyolitic eruption: A comparison of closure models for the granular stress. Journal of Volcanology and Geothermal Research. 2005 5/1/;143(1-3):113-32. http://dx.doi.org/10.1016/j.jvolgeores.2004.09.013.

8.

Dartevelle S., Valentine G. A. Early-time multiphase interactions between basaltic magma and underground openings at the proposed Yucca Mountain radioactive waste repository. Geophysical Research Letters. 2005 Nov 30;32(22). http://dx.doi.org/10.1029/2005gl024172.

9.

Dartevelle S. Technical Report on Comprehensive Approaches to Multiphase Flows in Geophysics – Application to nonisothermal, nonhomogenous, unsteady, large-scale, turbulent dusty clouds I. Hydrodynamic and Thermodynamic RANS and LES Models. 2005. Los Alamos National Laboratory (LANL) Los Alamos, NM, USA: LA-14228; TRN: US200612%%789. p. 128. http://dx.doi.org/10.2172/881277.

10.

Chandrasekaran B. K., van der Lee L., Hulme I., Kantzas A. A simulation and experimental study of the hydrodynamics of a bubbling fluidized bed of linear low density polyethylene using bubble properties and pressure fluctuations. Macromolecular Materials and Engineering. 2005 Jun 24;290(6):592-609. http://dx.doi.org/10.1002/mame.200500065.

11.

Breault R. W., Shadle L. J., Pandey P. Granular temperature, turbulent kinetic energy and solids fraction of cork particles at the wall in the riser of a CFB; 2005. In Cen, K (Ed.), Circulating Fluidized Bed Technology VIII (pp. 755-761). Hangzhou, China: Int Academic Publisers.

12.

Benyahia S., Syamlal M., O’Brien T. J. Evaluation of boundary conditions used to model dilute, turbulent gas/solids flows in a pipe. Powder Technology. 2005 Aug 23;156(2-3):62-72. http://dx.doi.org/10.1016/j.powtec.2005.04.002.

13.

Andrews A. T., Loezos P. N., Sundaresan S. Coarse-grid simulation of gas-particle flows in vertical risers. Industrial & Engineering Chemistry Research. 2005 Aug 3;44(16):6022-37. http://dx.doi.org/10.1021/ie0492193.

Publication Year 2004

1.

Xu Y. An improved multiscale model for dilute turbulent gas particle flows based on the equilibration of energy concept [Master’s Thesis]: Iowa State University, Ames, Iowa; 2004. p. 93.

2.

Xie N., Battaglia F., Fox R. O. Simulations of multiphase reactive flows in fluidized beds using in situ adaptive tabulation. Combustion Theory and Modelling. 2004 Jun;8(2):195-209. http://dx.doi.org/10.1088/1364-7830/8/2/001.

3.

Weber M. W. Simulation of Cohesive Particle Flows in Granular and Gas-Solid Systems [Doctoral Dissertation]: University of Colorado, Boulder, CO, USA; 2004. p. 223.

4.

Wang Xiaohua, Zhu Chao, Ahluwalia Rajesh. Numerical simulation of evaporating spray jets in concurrent gas-solids pipe flows. Powder Technology. 2004 2/16/;140(1-2):56-67. http://dx.doi.org/http://dx.doi.org/10.1016/j.powtec.2003.08.063.

5.

Sundaresan S. Final Technical Report on Coarse-Grid Simulation of Reacting and Non-Reacting Gas-Particle Flows. 2004. Princeton University Princeton, NJ, USA. p. 215. http://dx.doi.org/10.2172/836624.

6.

Sun J., Battaglia F. Effects of Particle Rotation on the Hydrodynamic Modeling of Segregation in Gas-Fluidized Beds. ASME 2004 International Mechanical Engineering Congress and Exposition; 2004; Anaheim, California, USA; 2004. p. 745-53.

7.

Lu H. L., He Y. R., Liu W. T., Ding J. M., Gidaspow D., Bouillard J. Computer simulations of gas-solid flow in spouted beds using kinetic-frictional stress model of granular flow. Chemical Engineering Science. 2004 Mar;59(4):865-78. http://dx.doi.org/10.1016/j.ces.2003.10.018.

8.

Gera Dinesh, Syamlal Madhava, O’Brien Thomas J. Hydrodynamics of particle segregation in fluidized beds. International Journal of Multiphase Flow. 2004 4//;30(4):419-28. http://dx.doi.org/10.1016/j.ijmultiphaseflow.2004.01.003.

9.

Dartevelle S., Rose W. I., Stix J., Kelfoun K., Vallance J. W. Numerical modeling of geophysical granular flows: 2. Computer simulations of plinian clouds and pyroclastic flows and surges. Geochemistry Geophysics Geosystems. 2004 Aug 18;5. http://dx.doi.org/10.1029/2003gc000637.

10.

Dartevelle S. Numerical modeling of geophysical granular flows: 1. A comprehensive approach to granular rheologies and geophysical multiphase flows. Geochemistry Geophysics Geosystems. 2004 Aug 18;5. http://dx.doi.org/10.1029/2003gc000636.

11.

Calo J. M. Final Report on Spouted Bed Electrodes (SBE) For Direct Utilization of Carbon In Fuel Cells. 2004. National Energy Technology Laboratory (NETL) Pittsburgh, PA, USA, Brown University Providence, Rhode Island, USA. p. 59. http://dx.doi.org/10.2172/841009.

12.

Bockelie M., Swensen D., Denison M., Sarofim A., Senior C. Final Report on A Computational Workbench Environment For Virtual Power Plant Simulation. 2004. National Energy Technology Laboratory (NETL) Pittsburgh, PA, and Morgantown, WV, USA, Reaction Engineering International Salt Lake City, Utah, USA. p. 444. http://dx.doi.org/10.2172/837892.

Publication Year 2003

1.

Whitty K. Annual Technical Report on Investigation of Fuel Chemistry and Bed Performance in a Fluidized Bed Black Liquor Steam Reformer. 2003. University Of Utah Salt Lake City, UT, USA. p. 75. http://dx.doi.org/10.2172/841593.

2.

Syamlal M., O’Brien T. J. Fluid dynamic simulation of O-3 decomposition in a bubbling fluidized bed. Aiche Journal. 2003 Nov;49(11):2793-801. http://dx.doi.org/10.1002/aic.690491112.

3.

Sundaresan S. Technical Report on Coarse-Grid Simulation of Reacting and Non-Reacting Gas-Particle Flows. 2003. Princeton University Princeton, NJ, USA. p. 98. http://dx.doi.org/10.2172/822872.

4.

Srivastava A., Sundaresan S. Analysis of a fractional-kinetic model for gas-particle flow. Powder Technology. 2003 Jan 8;129(1-3):72-85. http://dx.doi.org/10.1016/s0032-5910(02)00132-8.

5.

McKeen Tim, Pugsley Todd S. Simulation of Cold Flow FCC Stripper Hydrodynamics at Small Scale Using Computational Fluid Dynamics. International Journal of Chemical Reactor Engineering. 2003 2003;1.

6.

McKeen T., Pugsley T. Simulation and experimental validation of a freely bubbling bed of FCC catalyst. Powder Technology. 2003 Jan 8;129(1-3):139-52. http://dx.doi.org/10.1016/s0032-5910(02)00294-2.

7.

Loezos P. N. An investigation into dense and dilute gas particle flow [Doctoral Dissertation]: Princeton University, Princeton, NJ, USA; 2003.

8.

Holder G. D. Technical Report on University/NETL Student Partnership Program: 3rd year. 2003. (NETL) National Energy Technology Laboratory, University Of Pittsburgh Pittsburgh, Pennsylvania, USA. p. 1038. http://dx.doi.org/10.2172/812561.

9.

Holder G. D. Technical Report on University/NETL Student Partnership Program 2003. (NETL) National Energy Technology Laboratory, University Of Pittsburgh Pittsburgh, Pennsylvania, USA. p. 788. http://dx.doi.org/10.2172/924475.

10.

Gelderbloom S. J., Gidaspow D., Lyczkowski R. W. CFD simulations of bubbling/collapsing fluidized beds for three Geldart groups. Aiche Journal. 2003 Apr;49(4):844-58. http://dx.doi.org/10.1002/aic.690490405.

11.

Fan R., Marchisio D. L., Fox R. O. Application of the direct quadrature method of moments to polydisperse gas-solid fluidized beds. Powder Technology. 2004 Jan;139(1):7-20. http://dx.doi.org/10.1016/j.powtech.2003.10.005.

12.

Faletra P., Clark T., Jones R., et al. Journal of Undergraduate Research, Volume III, 2003. 2003. Federal Energy Technology Center Morgantown, WV, USA. p. 157.

13.

Energy Assistant Secretary for Fossil. Technical Report on Clean Coal Technology Programs: Program Update 2003 (Volume 1). 2003. Technology & Management Services Inc.: DOE/FE-0459-1; TRN: US200903%%176. p. 224. http://dx.doi.org/10.2172/827244.

14.

Dartevelle S. Numerical and granulometric approaches to geophysical granular flows [Doctoral Dissertation]: Michigan Technological University; 2003. p. 116.

15.

Cizmas P. G., Palacios A., O’Brien T., Syamlal M. Proper-orthogonal decomposition of spatio-temporal patterns in fluidized beds. Chemical Engineering Science. 2003 10//;58(19):4417-27. http://dx.doi.org/10.1016/S0009-2509(03)00323-3.

16.

Cizmas P. Final Technical Report on A Reduced Order Model Of Two-Phase Flow, Heat Transfer and Combustion In Circulating Fluidized-Beds. 2003. Texas Engineering Experiment Station College Station, Texas, USA. p. 71. http://dx.doi.org/10.2172/827038.

17.

Boyalakuntla D. S. Simulation of Granular and Gas-Solid Flows using Discrete Element Method [Doctoral Dissertation]: Carnegie Mellon University; 2003. p. 184.

Publication Year 2002

1.

Xie N. Simulations of multiphase reactive flows in fluidized beds using in situ adaptive tabulation method [Master’s Thesis]: Iosa State University, Ames, Iowa, USA; 2002.

2.

Srivastava A. Dense Phase Gas-solid Flows in Circulating Fluidized Beds [Doctoral Dissertation]: Princeton University, Princeton, NJ, USA; 2002. p. 406.

3.

Loezos P. N., Sundaresan S. The role of meso-scale structures on dispersion in gas-particle flows. In: Grace J. R., Zhu J., de Lasa H. I., editors. 7th International Conference on Circulating Fluidized Beds, May 5 – May 8, 2002; 2002; Niagara Falls, Ontario, Canada: Canadian Society for Chemical Engineering; 2002. p. 427-34.

4.

Cizmas P. Annual Technical Report on A Reduced Order Model Of Two-Phase Flow, Heat Transfer and Combustion In Circulating Fluidized-Beds. 2002. Texas Engineering Experiment Station College Station, Texas, USA. http://dx.doi.org/10.2172/813624.

Publication Year 2001

1.

Guenther C., Syamlal M. The effect of numerical diffusion on simulation of isolated bubbles in a gas-solid fluidized bed. Powder Technology. 2001 May 23;116(2-3):142-54. http://dx.doi.org/10.1016/s0032-5910(00)00386-7.

2.

Corporation The Foster Wheeler Development, (NETL) The National Energy Technology Laboratory. Final Report for CRADA No. 97-F001. 2000. National Energy Technology Laboratory (NETL) Morgantown, WV, and Pittsburgh, PA, USA, Foster Wheeler Development Corporation Livingston, NJ, USA: DOE/NETL-2001/1137; Contract CRADA 97-F001; TRN: AH200101%%10. p. 94. http://dx.doi.org/10.2172/772551.

3.

Bockelie M., Swensen D., Denison M. Technical Report on A Computational Workbench Environment For Virtual Power Plant Simulation. 2001. National Energy Technology Laboratory (NETL) Pittsburgh, PA, and Morgantown, WV, USA, Reaction Engineering International Salt Lake City, Utah, USA: TRN: US200212%%38. p. 20. http://dx.doi.org/10.2172/786011.

4.

Agrawal K., Loezos P. N., Syamlal M., Sundaresan S. The role of meso-scale structures in rapid gas-solid flows. Journal of Fluid Mechanics. 2001 Oct 25;445:151-85. http://dx.doi.org/10.1017/S0022112001005663.

Publication Year 2000

1.

Toseland B. A. Technical Report on Engineering Development of Slurry Bubble Column Reactor (SBCR) Technology. 2000. Air Products and Chemicals Inc., Allentown, PA, USA. p. 53. http://dx.doi.org/10.2172/822929.

2.

Agrawal K. The role of meso-scale structures in rapid granular and gas solid flows [Doctoral Dissertation]: Princeton University, Princeton, NJ, USA; 2000. p. 179.

Publication Year 1999

1.

Brown M. Science and Technology Highlights of ORNL’s Energy Efficiency and Renewable Energy Program, Number 1, 1999. 1999. Oak Ridge National Laboratory (ORNL) Oak Ridge, Tennessee, USA: ORNL/STH-1999/1; TRN: AH200130%%81. p. 157. http://dx.doi.org/10.2172/14760.

Publication Year 1998

1.

Syamlal M. MFIX Documentation: Numerical Technique. 1998. Federal Energy Technology Center Morgantown, WV, USA, EG and G Technical Services of West Virginia Inc., Morgantown, WV, USA: DOE/MC/31346–01; ON: DE98057983; TRN: AHC29817%%200. p. 84. http://dx.doi.org/10.2172/656644.

2.

Gera D., Gautam M., Tsuji Y., Kawaguchi T., Tanaka T. Computer simulation of bubbles in large-particle fluidized beds. Powder Technology. 1998 7/15/;98(1):38-47. http://dx.doi.org/10.1016/S0032-5910(98)00017-5.

Publication Year 1997

1.

Joyce E. L. National laboratories` capabilities summaries for the DOE Virtual Center for Multiphase Dynamics (VCMD). 1997. Los Alamos National Laboratory (LANL) Los Alamos, NM, USA: LA-UR–96-4842; ON: DE97003590; TRN: 97:001683. p. 52. http://dx.doi.org/10.2172/444064.

2.

Inc. Advanced Fuel Research. Technical Report on Fossil fuel conversion — Measurement and modeling. 1997. Federal Energy Technology Center Morgantown, WV, USA, Advanced Fuel Research Inc. East Hartford, CT, USA: DOE/MC/30040–2; ON: DE98058980; TRN: AHC29819%%51. p. 216. http://dx.doi.org/10.2172/665897.

Publication Year 1996

1.

Final Report on Development of a high-performance coal-fired power generating system with pyrolysis gas and char-fired high temperature furnace (HITAF). 1996. Pittsburgh Energy Technology Center Pittsburgh, Pennsylvania, USA, Foster Wheeler Development Corp. Livingston, NJ, USA: DOE/PC/91154–T11; ON: DE96010134. p. 238. http://dx.doi.org/10.2172/224449.

Publication Year 1995

1.

Syamlal M., Nicoletti P. A. Final Report on Multiphase Flow Modeling – Validation and Application CRADA MC94-019. 1995. Federal Energy Technology Center Morgantown, WV, and Pittsburgh, PA, USA: DOE/FETC-99/1081; CRADA MC94-019; ON: DE00003027. p. 5. http://dx.doi.org/10.2172/3027.

2.

Technical Report on MFIX Validation Studies, December 1994 to November 1995, CRADA No. PC94-026. 1997. Federal Energy Technology Center Morgantown, WV, USA: DOE/FETC–97/1042; ON: DE97002161; CRN: C/PETC–94-026.

Publication Year 1994

1.

Syamlal M. MFIX Documentation: User`s Manual. 1994. Morgantown Energy Technology Center Morgantown, WV, USA, EG and G Technical Services of West Virginia Inc., Morgantown, WV, USA: DOE/METC–95/1013; ON: DE95012201; TRN: 95:004613. p. 95. http://dx.doi.org/10.2172/69312.

Publication Year 1993

1.

Syamlal M., Rogers W., O`Brien T.J. MFIX Documentation: Theory Guide. 1993. Morgantown Energy Technology Center Morgantown, WV, USA: DOE/METC–94/1004; ON: DE94000087. p. 54. http://dx.doi.org/10.2172/10145548.

2.

Nicoletti P. A., Rogers W., Sams W. N., Syamlal M., Venkatesan S. MFIX. Multiphase Flow with Interphase eXchanges. 1993. Morgantown Energy Technology Center Morgantown, WV, USA: ESTSC–000799SGIIP00.

Publication Year 1991

1.

Gray D., Stiles J. M., Celik I. Final Report on Theoretical and numerical studies of constitutive relations for frictional granular flow. 1991. Morgantown Energy Technology Center Morgantown, WV, USA, West Virginia University Morgantown, WV, USA: DOE/MC/24207-3009; ON: DE91002089. p. 168. http://dx.doi.org/10.2172/5119247.

Publication Year 1990

1.

Gray D., Stiles J. M. Technical Report on Theoretical and numerical studies of constitutive relations for frictional granular flow. 1990. Morgantown Energy Technology Center Morgantown, WV, USA, West Virginia University Morgantown, WV, USA: DOE/MC/24207-2852; ON: DE90009662.