MFiX Logo
22.2
  • 1. About MFiX
  • 2. Getting started
  • 3. Tutorials
    • 3.1. Running first tutorial
    • 3.2. Create a new project
    • 3.3. Select model parameters
    • 3.4. Enter the geometry
    • 3.5. Enter the mesh
    • 3.6. Create regions for initial and boundary condition specification
    • 3.7. Create a solid
    • 3.8. Create Initial Conditions
    • 3.9. Create Boundary Conditions
    • 3.10. Change numeric parameters
    • 3.11. Select output options
    • 3.12. Change run parameters
    • 3.13. Run the project
    • 3.14. View results
    • 3.15. Increase grid resolution
    • 3.16. Two-dimensional fluidized bed, Discrete Element Model (DEM)
    • 3.17. Three-dimensional single phase flow over a sphere
    • 3.18. Three-dimensional fluidized bed
    • 3.19. Three-dimensional DEM hopper
    • 3.20. DEM granular flow chutes
    • 3.21. SMS meshing workflow, cyclone, Discrete Element Model (DEM)
    • 3.22. DEM initial conditions
    • 3.23. Procedural geometry
    • 3.24. Advanced Tutorials
  • 4. Model Guide
  • 5. Building the Solver
  • 6. Running the Solver
  • 7. Visualization
  • 8. GUI reference
  • 9. Running Interactive Solver Job in Queue
  • 10. Running MFiX on Joule
  • 11. Keyword reference
  • 12. Frequently Asked Questions
MFiX
  • »
  • 3. Tutorials
  • View page source

3. TutorialsΒΆ

These are detailed step-by-step tutorials for setting up projects in MFiX from scratch.

  • 3.1. Running first tutorial
  • 3.2. Create a new project
  • 3.3. Select model parameters
  • 3.4. Enter the geometry
  • 3.5. Enter the mesh
  • 3.6. Create regions for initial and boundary condition specification
  • 3.7. Create a solid
  • 3.8. Create Initial Conditions
  • 3.9. Create Boundary Conditions
  • 3.10. Change numeric parameters
  • 3.11. Select output options
  • 3.12. Change run parameters
  • 3.13. Run the project
  • 3.14. View results
  • 3.15. Increase grid resolution
  • 3.16. Two-dimensional fluidized bed, Discrete Element Model (DEM)
  • 3.17. Three-dimensional single phase flow over a sphere
  • 3.18. Three-dimensional fluidized bed
  • 3.19. Three-dimensional DEM hopper
  • 3.20. DEM granular flow chutes
  • 3.21. SMS meshing workflow, cyclone, Discrete Element Model (DEM)
  • 3.22. DEM initial conditions
  • 3.23. Procedural geometry
  • 3.24. Advanced Tutorials
Next Previous

© Copyright 2019, NETL Multiphase Flow Science Team.

Built with Sphinx using a theme provided by Read the Docs.