Abstract: Industrial bubbling fluidized beds are used to fluidize particles. When particles are fluidized, electrostatic effects will cause the particles to form obvious agglomerates, thus reducing fluidization performance. For better fluidization performance, internal component immersed tubes are usually placed in fluidized bed to limit the bubble size and reduce particle agglomerates. Meanwhile, pulsed gas flow can increase particle disturbance, which is also an effective method to reduce particle agglomerates. In this paper, the CFD-DEM model under electrostatic effects is constructed to research the bubbling and flow characteristics in fluidized beds. Firstly, particle mixing qualities with and without the immersed tube are compared. Then, the effects of different superficial gas velocities are investigated with an immersed tube. Finally, different frequencies are applied to study the energy loss and flow characteristics around the immersed tube. The results show that the addition of the immersed tube can reduce bubble size to facilitate particle mixing. Due to the obstruction of the immersed tube, the bubbles are generated near the wall. As the superficial gas velocity increases, the larger bubbles are generated. Moreover, the electrostatic force applied to the particles varies periodically with the frequency of incoming pulsed gas flow, with fluctuations maximal at 2.5 Hz.