Juray De Wilde, George Richards, Sofiane Benyahia, Qualitative numerical study of simultaneous high-G-intensified gas–solids contact, separation and segregation in a bi-disperse rotating fluidized bed in a vortex chamber, Advanced Powder Technology, Volume 27, Issue 4, July 2016, Pages 1453-1463, ISSN 0921-8831, http://dx.doi.org/10.1016/j.apt.2016.05.005.
Type Citation: Journal
Wei Zhang, Changfu You, Numerical simulation of particulate flows in CFB riser with drag corrections based on particle distribution characterization, Chemical Engineering Journal, Volume 303, 1 November 2016, Pages 145-155, ISSN 1385-8947, http://dx.doi.org/10.1016/j.cej.2016.05.139.
M. Anil, S. Rupesh, C. Muraleedharan, P. Arun, Performance Evaluation of Fluidised Bed Biomass Gasifier Using CFD, Energy Procedia, Volume 90, December 2016, Pages 154-162, ISSN 1876-6102, http://dx.doi.org/10.1016/j.egypro.2016.11.180.
A. Bakshi, C. Altantzis, R.B. Bates, A.F. Ghoniem, Study of the effect of reactor scale on fluidization hydrodynamics using fine-grid CFD simulations based on the two-fluid model, Powder Technology, Volume 299, October 2016, Pages 185-198, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2016.05.029.
Seyed Ahmad Kia, Javad Aminian, Hydrodynamic modeling strategy for dense to dilute gas–solid fluidized beds, Particuology, Available online 9 November 2016, ISSN 1674-2001, http://dx.doi.org/10.1016/j.partic.2016.06.004.
Tsuyoshi Yamamoto, Takahiro Tsuboi, June Tatebayashi, A numerical simulation of PM adhesion characteristics in a fluidized bed type PM removal device by a finite volume Eulerian–Eulerian method, Powder Technology, Volume 288, January 2016, Pages 26-34, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2015.10.033.
A.B. Morris, Z. Ma, S. Pannala, C.M. Hrenya, Simulations of heat transfer to solid particles flowing through an array of heated tubes, Solar Energy, Volume 130, June 2016, Pages 101-115, ISSN 0038-092X, http://dx.doi.org/10.1016/j.solener.2016.01.033.
Tianqi Tang, Yurong He, Anxing Ren, Yunhua Zhao, Investigation on wet particle flow behavior in a riser using LES-DEM coupling approach, Powder Technology, Volume 304, December 2016, Pages 164-176, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2016.08.023.
J. Krzywanski, A. Żyłka, T. Czakiert, K. Kulicki, S. Jankowska, W. Nowak, A 1.5D model of a complex geometry laboratory scale fuidized bed clc equipment, Powder Technology, Available online 17 September 2016, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2016.09.041.
Anil Yuksel, Michael Cullinan, Modeling of nanoparticle agglomeration and powder bed formation in microscale selective laser sintering systems, Additive Manufacturing, Volume 12, Part B, October 2016, Pages 204-215, ISSN 2214-8604, http://dx.doi.org/10.1016/j.addma.2016.07.002.