Spatial averages
The following inputs must be preceded by “mfix.” and control whether to compute spatial averages, and how often to output the results. n is the number of spatial averages implicitly defined by the size of avg_region_x_w.
Description |
Type |
Default |
|
---|---|---|---|
avg_int |
Interval, in number of CFD dt’s, to write output |
Int |
-1 |
avg_file |
Base file name which is appended with the data type (vel_p, p_g, ep_g or vel_g), the number of this type of averaging, and the .csv file extension |
String |
avg_region |
avg_ep_g |
Average and save fluid-phase volume fraction (if 1) |
n*Int |
0 |
avg_p_g |
Average and save fluid-phase pressure (if 1) |
n*Int |
0 |
avg_vel_g |
Average and save fluid-phase velocity (if 1) |
n*Int |
0 |
avg_T_g |
Average and save fluid-phase temperature (if 1) |
n*Int |
0 |
avg_ro_p |
Average and save particle density (if 1) |
n*Int |
0 |
avg_vel_p |
Average and save particle velocity (if 1) |
n*Int |
0 |
avg_T_p |
Average and save particle temperature (if 1) |
n*Int |
0 |
avg_region_x_w |
Lower bound of averaging region in x-direction |
n*Real |
None |
avg_region_x_e |
Upper bound of averaging region in x-direction |
n*Real |
None |
avg_region_y_s |
Lower bound of averaging region in y-direction |
n*Real |
None |
avg_region_y_n |
Upper bound of averaging region in y-direction |
n*Real |
None |
avg_region_z_b |
Lower bound of averaging region in z-direction |
n*Real |
None |
avg_region_z_t |
Upper bound of averaging region in z-direction |
n*Real |
None |