2014 Multiphase Flow Science Workshop

2014 NETL Workshop on Multiphase Flow Science

Tuesday,  August  5, 2014 – Governors Ballroom,  Lakeview Resort

Registration (Grand Ballroom Foyer)

Break (Grand Ballroom Foyer) and Posters

Lunch (Governor Ballroom 4-6) and Posters (Foyer)

Reconvene and Afternoon Introduction (Governors Ballroom 1-3)

Break (Grand Ballroom Foyer) and Posters

Wednesday,  August  6, 2014 – Governors Ballroom,  Lakeview Resort

Reconvene and Introduction (Governors Ballroom 1-3)

Break (Grand Ballroom Foyer) and Posters

  • Numerical Simulation of Film Flow Over an Inclined Plate: effects of Solvent Properties and Contact Angle
    Rajesh Singh and Janine Carney, NETL
  • A Study of Resident Time Distributions in Riser Reactors for Upgrading Biomass Pyrolysis Vapors
    Jack Ziegler1, Sreekanth Pannala2, Ray Grout1, David Robichaud1, Mark Nimlos1, and Thomas Foust1, 1National Renewable Energy Laboratory, 2Oak Ridge National Laboratory
  • Trickle Bed Reactor Experiment Using Electrical Capacitance Volume Tomography
    Qussai Marashdeh1, Liang-Shih Fan2, 1Tech4Imaging LLC, 2Ohio State University

Lunch (Governor Ballroom 4-6) and Posters (Foyer)

Reconvene and Afternoon Introduction (Governors Ballroom 1-3)

 

Meeting Wrap-up and Adjourn

 

Posters (Reflections Library)

  • Characterization of the Physical Properties for Granular Materials
    Jonathan Tucker, Lawrence Shadle, Sofiane Benyahia, Joseph Mei, and Chris Guenther, NETL
  • NETL Small Scale Challenge Problem
    Balaji Gopalan, NETL
  • Modeling of Foamed Cement with MFIX
    Surya Deb, William Rogers, NETL
  • Electrostatic Charging in Gas-Solid Systems
    Jonathan Tucker, Lawrence Shadle, Sofiane Benyahia, Mark Koepke, and Chris Guenther, NETL
  • Microwave Flow Sensor Development
    Benjamin Chorpening, NETL

 

 

National Energy Technology Laboratory

Phone: (412) 386-6044
FAX: (412) 386-6486
E-mail: kimberly.yavorsky@netl.doe.gov


Disclaimer
This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government or any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.

Share
Share
Share
Share